More information about the Sublimable Mug with Pre-printed Interior "Gracias"

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Mug with interior message "Gracias", ideal as a gift for grandparents, teachers, Mother's Day, Father's Day...
• Cylindrical body, customisable on its entire external surface
• Suitable for customisation with a transfer press using 11 oz resistances. Also with a sublimation oven
• Can also be customised with other techniques such as DTF, screen printing, transfer, and adhesive vinyl

THINGS TO KEEP IN MIND

• Although it does not include a box, you can purchase box models separately to present and transport this mug. You will find them in Related Products

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

WITH MUG PRESS

• Print the design in mirror mode
• Heat the press to 180 °C
• Place the paper with the printed side on the mug and secure it with thermal adhesive tape
• Close the press with medium-high pressure for 200 seconds
• Using a protective glove, remove the newly sublimated mug
• Carefully remove the paper

WITH SUBLIMATION OVEN

• Print the design in mirror mode
• Heat the oven to 180 °C
• Place the printed design in mirror mode around the mug and secure it using thermal adhesive tape
• Adjust the clamp, or place the mug inside a shrink wrap bag and heat with a heat gun to avoid wrinkles. You can also use a silicone sheet
• Sublimate in the oven for 13-15 minutes
• Using a protective glove, remove the clamp, silicone sheet, or bag, as applicable
• Carefully remove the paper from the mug