Sublimable Fabric Lanyards with Carabiner Hooks
Polyester identification bands, customisable on both sides by dye sublimation printing.
- With metal swivel snap hook
- With or without buckle fastener
- Print area (per side): 2 x 43 cm
- Additional carabiners can be purchased separately
More information about Sublimable Fabric Lanyards with Carabiner Hooks
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Perfect as merchandising for any kind of event or everyday use
- The metal hook allows you to hang badges, badges, badges, keys, glasses, whistles or other items
- Ref. 053903 made of white 300D RPET polyester with RPET label sewn on the bottom side. Made from recycled plastic
- Ref. 038053 made of white nuclear polyester with black plastic buckle. Snap fastener
- Sublimatable on the entire surface (2 outer sides and 2 inner sides of the strap)
- Can also be customised using other techniques such as screen printing, textile vinyl, embroidery, DTF and DTG
THINGS TO KEEP IN MIND
- It is recommended to sublimate each side separately, covering the remaining part of the lanyard with paper or ribbon to avoid ink stains
- During sublimation, keep the carabiner and buckle away from the iron to protect it from scratches caused by metal
DIMENSIONS
| Part number |
053903 | 038053 |
| Name | Without buckle | With buckle |
| Strap (cm) | 2 x 89 |
2 x 89 |
| Carabiner (cm) | 2,9 x 3,8 x 0,4 |
2,9 x 3,8 x 0,4 |
| Buckle (cm) |
- |
2,4 x 3,2 |
| Print area (per side) (cm) |
2 x 43 | 2 x 43 |
| Weight (g) | 9 |
12 |
INSTRUCTIONS AND SPECIFIC PARAMETERS FOR SUBLIMATION
Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
- Print the design in mode mirror
- Preheat the press to 180 ºC
- Place the part of the lanyard to be sublimated on the base of the iron and the printed part of the paper on top of it. You can tape it with thermal tape to prevent it from moving
- Cover the rest of the lanyard with protective paper to prevent ink migration
- Close the press at medium-high pressure for 40 seconds
- With the help of a protective glove, remove the freshly printed lanyard
- Carefully remove the paper
- Repeat the same operation for all parts to be personalised
| Ref. | 951597 |
|---|---|
| Dimensions (mm) | 29 x 480 x 4 |
| Print area (mm) | 20 x 445 |
| Colour | White |
| Composition | Polyester |
| Accessory details | Carabiner |
| Marking techniques | Dye sublimation, DTF, Transfer, Screen printing, HTV, DTG, Embroidery |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question