Sublimable Ceramic Cutting Board with Cork Back
Sublimable Ceramic Cutting Board with Cork Back
Ceramic cutting board customizable by dye sublimation printing.
- Wall hanging hole
- Adhesive-backed cork sheet included for attachment to the back of the board
- Print area: 17 x 28.6 cm
Related Products
More information about the Sublimable Ceramic Cutting Board with Cork Back
INDEX
> Recommended instructions and parameters for sublimation printing
DESCRIPTION
- Ideal as a gift for kitchen events or as a merchandising item
- Made of glossy white ceramic, printable on one side
- Fine finishes, smooth surface and rounded corners
- Hole for hanging on the wall
- Includes a cork sheet with adhesive to stick on the back of the board after sublimation
- Die-cut hole in the cork sheet
- Non-slip thanks to the cork on the back
- Comes in a white presentation box with a window to view the board
DIMENSIONS
| Board (cm) | 17 x 28.6 |
| Thickness (mm) | 7 |
| Hole (mm) | Ø9 |
| Cork sheet (cm) | 16 x 27.8 |
| Print area (cm) | 17 x 28.6 |
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH A FLAT PRESS
- Print in mirror image
- Preheat the press to 175 ºC
- Place a Nomex pad on the lower platen of the press and then protective paper to prevent ink transfer
- Place the printed design on the board and secure with heat-resistant tape to prevent movement
- Place the board "face down" on the Nomex pad. The printable side of the board covered with the paper should be in direct contact with the pad
- Close the press and sublimate at medium-high pressure for 120 seconds
- Open the press and remove the newly sublimated board using a protective glove
- Once cool, place the cork on the back of the board. To do this, remove the protective paper from the adhesive on the cork
WITH A 3D OVEN AND VACUUM MEMBRANE
- Print in mirror image
- Preheat the 3D oven to 175 ºC
- Place the printed design face down on the white side of the board and secure with heat-resistant tape
- Place the board on the top tray of the oven with the printable side facing up
- Close the membrane and create the vacuum. Ensure there are no air bubbles on the surface
- Close the oven and run for 120 seconds
- Open the oven and remove the newly sublimated board using a protective glove
- Once cool, place the cork on the back of the board
| Ref. | 036889 |
|---|---|
| Print area (mm) | 170 x 286 |
| Thickness (mm) | 7 |
| Colour | White |
| Surface material | Ceramic, Cork |
| Items | Cutting board |
| Marking techniques | Dye sublimation |
| Height (cm) | 1.5 |
| Width (cm) | 17.6 |
| Length (cm) | 29.0 |
| Gross weight (kg) | 550 |
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question