More information about the Sublimable Bicycle Bells

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Sublimable plate on the white side. Silver-coloured reverse with adhesive for attaching to the bell
• Metal bell with adjustable black plastic clamp
• Side trigger or lever that is pressed to emit the bell's "ding" sound
• Easy to install. The clamp is placed on the handlebar and adjusted with the included screws

THINGS TO KEEP IN MIND

• The customisable side of the plate has a protective film that must be removed before sublimation
• It is recommended to fix the plate to the base carefully. Once adhered, it may break if attempting to remove it
• The plate with Ref. 038972 is slightly smaller than the bell, but adheres perfectly to its base

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Remove the protective plastic covering the sublimable side of the plate
• Place the plate on the base plate of the press and the printed side of the paper on the plate. Secure with heat-resistant tape
• Close the press with medium-high pressure for 40 seconds
• Using a protective glove, remove the freshly printed plate
• Carefully remove the paper