More information about Sublimable Acrylic LED Badges

INDEX

> Description

> Please note

> Tips and tricks

> Dimensions

> Recommended Sublimation Instructions and Parameters

DESCRIPTION

• Plate with a white sublimatable reverse for direct sublimation
• The image can be seen through the glossy transparent face, with a 3D effect
• LED lighting in 3 modes:
  • Blue with rapid flashing
  • Light blue with slow flashing
  • Multicolour flashing
• Easy to assemble: remove the liner from the adhesive base and attach the customised acrylic plate
• Back with a button to turn on and change the lights
• Foam base with adhesive for fixing the plate. It adds a little depth and has a space for the LED bulb
• Safety pin fastening on the back to attach it to T-shirts, jackets...

PLEASE NOTE

• Customise the plate before attaching it to the LED lighting base to avoid exposing the electronic components to heat
• Works with 3 LR1130 button cell batteries. The cover can be removed for easy replacement

TIPS AND TRICKS

• Laser engrave the badge to create original designs that stand out with the LED lighting
• Combine names and logos to create customised corporate ID badges

DIMENSIONS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters provided as a guide. We recommend carrying out preliminary tests to make the necessary adjustments before starting production.

• Print the design in direct mode
• Heat the press to 180 °C
• Place the acrylic on the base of the press and the printed side of the paper onto the white side. Secure them with thermal adhesive tape
• Close the press with medium-low pressure for 90 seconds
• Using a protective glove, remove the freshly printed acrylic
• Carefully remove the paper
• Peel off the protective liner from the base adhesive
• Place the already sublimated acrylic onto the adhesive base and press to secure it