More information about Shrink Plastic Inkjet Printing

INDEX

> Description

> Things to keep in mind

> Instructions for customising via Inkjet printing

> Measurements

> Parameters for heat application with oven

DESCRIPTION

• Easy and quick to use: print with a home printer, cut out the design, and apply heat with an oven or heat gun
• Customisable on the matte and rough side. The other side is glossy and smooth
  • On white sheet: the design is visible on the matte side. The reverse is white and glossy
  • On transparent sheet: the design is visible on both sides, one matte and the other glossy
• Can also be customised using common markers
• No professional tools required: just an inkjet printer, scissors, cutter, and home oven
• Suitable for cutting with plotter
• Water-resistant, UV rays, humidity...

THINGS TO KEEP IN MIND

• It is advisable to design the project 3 to 5 times larger than the desired final size
• Place the print side up when applying heat for better results
• After removing from heat, gently press the pieces to flatten them before they cool or shape them as needed
• When using a heat gun, it is recommended to hold the piece with a thin rod to prevent the edges from sticking or flying away

INSTRUCTIONS FOR CUSTOMISING VIA INKJET PRINTING

1. Choose between white or transparent shrink plastic
2. Print the design on the matte and rough side of the A4 with an inkjet printer
3. Once printed, let it dry for a few seconds and cut out the design with scissors, plotter...
4. Apply heat in a preheated oven or with an heat gun
5. The plastic will shrink, becoming thicker and more rigid
6. Shape or press to flatten the piece before it cools

MEASUREMENTS

PARAMETERS FOR HEAT APPLICATION WITH OVEN