Allows you to offer your own stamp customisation service at a low cost
Easy and quick to install and use. Customise stamps immediately
Print the design on the sulphurised paper, place it on the pad with the film and insert it into the exposure box, the machine will do the rest
The printed design acts as a negative. Areas not exposed to UV light form the stamp
Control buttons to adjust exposure voltage
Display with ambient temperature and voltage indicator
Includes a handle for easy transport
Stamps with refillable ink handle available in various shapes
You can purchase more film, paper, and inks in various colours in Related Products. You will also find the photosensitive pad in sheet format of 44.5 x 18 cm, make stamps of the desired size and shape by cutting the sheet with CO2 laser, cutter, or scissors
THINGS TO KEEP IN MIND
The design must be printed on sulphurised paper with a laser printer
For the correct operation of this machine, only photosensitive pads should be used
Ensure the photosensitive exposure box is clean before use
Keep the machine turned off when not in use
The stamping machine shown in the video is a previous model to the current one, however, both share the same features
WHAT MATERIAL DOES THIS MACHINE INCLUDE?
1
Exposure box
2
Stamp handles Ø45 mm
10
Round stamp pads
20
A4 film sheets
20
A4 sulphurised paper sheets
2
Red ink bottles 5 ml
1
Power cable
ADDITIONAL STAMPS WITH REFILLABLE INK HANDLE
Self-inking stamps. No ink pad or pads needed
Top unscrews with a hole for refilling with liquid ink
Includes bottom cap to cover the pad and prevent ink stains
TECHNICAL DATA
Power (V)
220
Frequency (Hz)
50
Power (W)
80 - 120
Maximum output energy (J)
3800
Number of lamps (tubes)
1-3
RECOMMENDED USAGE INSTRUCTIONS
Print your design in black on sulphurised paper with your laser printer. Do not print in mirror mode
Cut the film and printed paper to the size of the stamp
Open the exposure box
First place the stamp pad
Then place the film and finally the printed paper face down
Close the exposure box and place it inside the tray
Close the tray and turn on the machine
Adjust the voltage value to around 400 V
Wait for the machine to charge until you see a flash
Remove the exposure box
Insert the stamp into its handle
Cover the stamp surface with ink
Let it absorb the ink for a few seconds
Remove excess ink from the surface
APPROXIMATE DIMENSIONS
Stamping machine (cm)
29 x 14 x 18
Packaging (cm)
35 x 20 x 25
Stamp pads (cm)
Ø4.2 x 0.8
Exposure screen (mm)
11 x 7.1
Exposure box (cm)
21 x 10.1 x 2.9
Stamp holder (cm)
Ø5 x 7
Weight (kg)
3
APPROXIMATE DIMENSIONS OF ADDITIONAL STAMPS
Reference
Name
Units
Dimensions
Weight (g)
049279
Round stamp
1 stamp
Ø4.5 x 0.8 cm
50
049281
Oval stamp
1 stamp
4.6 x 3.4 x 0.8 cm
44
049280
Rectangular stamp
1 stamp
6.3 x 2.7 x 0.8 cm
58
Additional Information
Ref.
950426
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Log in to your profile, share your opinion, and enter the monthly "Rate & Win" prize draw
3.3
3
reviews
5
1
4
1
3
0
2
0
1
1
E
Eduardo
Verified Buyer
19 Jun 2026
From Brildor Spanish
Máquina para sellos práctica y económica
La máquina de sellos es muy fácil de usar y ofrece acabados nítidos. Ideal para mi negocio: reduce tiempos y costes.
J
Jose M.
Verified Buyer
21 Jan 2026
From Brildor Spanish
Sensacional.
Otra forma diferente de hacer un sello. Fácil de utilizar y con todo lo necesario. Además, el vídeo explicativo ayuda a la hora de seguir todo el proceso.
D
Dan
Verified Buyer
12 Jan 2026
This machine doesn't work at all
You will throw your money on this machine , which does not work at all.
See all images
Questions
No questions found for this product.
Be the first to ask a question!
https://www.brildor.com/en/rubber-stamp-making-machine-accessoriesen_50426Stamping Machine and Accessories<p class="enlace"><a id="know-more"></a> </p>
<h2>More information about the Stamping Machine</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more8">Things to keep in mind</a></p>
<p>> <a href="#know-more7">What material does this machine include?</a></p>
<p>> <a href="#know-more9">Additional stamps with refillable ink handle</a></p>
<p>> <a href="#know-more2">Technical data</a></p>
<p>> <a href="#know-more3">Recommended usage instructions</a></p>
<p>> <a href="#know-more4">Approximate dimensions</a></p>
<p>> <a href="#know-more6">Approximate dimensions of additional stamps</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Allows you to offer your own stamp customisation service at a low cost</li>
<li>Easy and quick to install and use. Customise stamps immediately</li>
<li>Print the design on the sulphurised paper, place it on the pad with the film and insert it into the exposure box, the machine will do the rest</li>
<li>The printed design acts as a negative. Areas not exposed to UV light form the stamp</li>
<li>Control buttons to adjust exposure voltage</li>
<li>Display with ambient temperature and voltage indicator</li>
<li>Includes a handle for easy transport</li>
<li>Stamps with refillable ink handle available in various shapes</li>
<li>You can purchase more film, paper, and inks in various colours in <strong>Related Products</strong>. You will also find the <strong>photosensitive pad</strong> in sheet format of <span class="azul-negrita">44.5 x 18 cm</span>, make stamps of the desired size and shape by cutting the sheet with CO2 laser, cutter, or scissors</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more8"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The design must be printed on sulphurised paper with a <strong>laser printer</strong></li>
<li>For the correct operation of this machine, only photosensitive pads should be used</li>
<li>Ensure the photosensitive exposure box is clean before use</li>
<li>Keep the machine turned off when not in use</li>
<li>The stamping machine shown in the video is a previous model to the current one, however, both share the same features</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more7"></a> </p>
<p><strong>WHAT MATERIAL DOES THIS MACHINE INCLUDE?</strong></p>
<table>
<tbody>
<tr>
<td style="text-align: right;"><span class="azul-negrita">1</span></td>
<td><strong>Exposure box</strong></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">2</span></td>
<td><strong>Stamp handles </strong><span class="azul-negrita">Ø45 mm</span></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">10</span></td>
<td><strong>Round stamp pads </strong></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">20</span></td>
<td><strong>A4 film sheets</strong></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">20</span></td>
<td><strong>A4 sulphurised paper sheets</strong></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">2</span></td>
<td><strong>Red ink bottles <span class="azul-negrita">5 ml</span></strong></td>
</tr>
<tr>
<td style="text-align: right;"><span class="azul-negrita">1</span></td>
<td><strong>Power cable</strong></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more7"></a> </p>
<p><strong>ADDITIONAL STAMPS WITH REFILLABLE INK HANDLE</strong></p>
<ul>
<li>Self-inking stamps. No ink pad or pads needed</li>
<li>Top unscrews with a hole for refilling with liquid ink</li>
<li>Includes bottom cap to cover the pad and prevent ink stains</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>TECHNICAL DATA</strong></p>
<table>
<tbody>
<tr>
<td><strong>Power (V)</strong></td>
<td><span class="azul-negrita">220</span></td>
</tr>
<tr>
<td><strong>Frequency (Hz)</strong></td>
<td><span class="azul-negrita">50</span></td>
</tr>
<tr>
<td><strong>Power (W)<br></strong></td>
<td><span class="azul-negrita">80 - 120</span></td>
</tr>
<tr>
<td><strong>Maximum output energy (J)</strong></td>
<td><span class="azul-negrita">3800</span></td>
</tr>
<tr>
<td><strong>Number of lamps (tubes)<br></strong></td>
<td><span class="azul-negrita">1-3</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>RECOMMENDED USAGE INSTRUCTIONS</strong></p>
<ul>
<li>Print your design in black on sulphurised paper with your <strong>laser printer</strong>. Do not print in mirror mode</li>
<li>Cut the film and printed paper to the size of the stamp</li>
<li>Open the exposure box</li>
<li>First place the stamp pad</li>
<li>Then place the film and finally the printed paper face down</li>
<li>Close the exposure box and place it inside the tray</li>
<li>Close the tray and turn on the machine</li>
<li>Adjust the voltage value to around <span class="azul-negrita">400 V</span></li>
<li>Wait for the machine to charge until you see a flash</li>
<li>Remove the exposure box</li>
<li>Insert the stamp into its handle</li>
<li>Cover the stamp surface with ink</li>
<li>Let it absorb the ink for a few seconds</li>
<li>Remove excess ink from the surface</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>APPROXIMATE DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Stamping machine (cm)</strong></td>
<td><span class="azul-negrita">29 x 14 x 18</span></td>
</tr>
<tr>
<td><strong>Packaging (cm)</strong></td>
<td><span class="azul-negrita">35 x 20 x 25</span></td>
</tr>
<tr>
<td><strong>Stamp pads (cm)</strong></td>
<td><span class="azul-negrita">Ø4.2 x 0.8</span></td>
</tr>
<tr>
<td><strong>Exposure screen (mm)</strong></td>
<td><span class="azul-negrita">11 x 7.1</span></td>
</tr>
<tr>
<td>
<p><strong>Exposure box (cm)</strong></p>
</td>
<td><span class="azul-negrita">21 x 10.1 x 2.9</span></td>
</tr>
<tr>
<td>
<p><strong>Stamp holder (cm)</strong></p>
</td>
<td><span class="azul-negrita">Ø5 x 7</span></td>
</tr>
<tr>
<td>
<p><strong>Weight (kg)</strong></p>
</td>
<td><span class="azul-negrita">3</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more6"></a> </p>
<p><strong>APPROXIMATE DIMENSIONS OF ADDITIONAL STAMPS</strong></p>
<table>
<tbody>
<tr>
<td style="text-align: center;"><strong>Reference</strong></td>
<td style="text-align: center;"><strong>Name</strong></td>
<td style="text-align: center;"><strong>Units</strong></td>
<td style="text-align: center;"><strong>Dimensions</strong></td>
<td style="text-align: center;"><strong>Weight (g)</strong></td>
</tr>
<tr>
<td style="text-align: center;"><strong>049279</strong></td>
<td style="text-align: center;">Round stamp</td>
<td style="text-align: center;">1 stamp</td>
<td style="text-align: center;"><span class="azul-negrita">Ø4.5 x 0.8 cm</span></td>
<td style="text-align: center;"><span class="azul-negrita">50</span></td>
</tr>
<tr>
<td style="text-align: center;"><strong>049281</strong></td>
<td style="text-align: center;">Oval stamp</td>
<td style="text-align: center;">1 stamp</td>
<td style="text-align: center;"><span class="azul-negrita">4.6 x 3.4 x 0.8 cm</span></td>
<td style="text-align: center;"><span class="azul-negrita">44</span></td>
</tr>
<tr>
<td style="text-align: center;"><strong>049280</strong></td>
<td style="text-align: center;">Rectangular stamp</td>
<td style="text-align: center;">1 stamp</td>
<td style="text-align: center;"><span class="azul-negrita">6.3 x 2.7 x 0.8 cm</span></td>
<td style="text-align: center;"><span class="azul-negrita">58</span></td>
</tr>
</tbody>
</table>https://www.brildor.com/media/catalog/product/m/_/m_quina-estampaci_n-sellos-l9-3800-d7.jpg149instock014933.33333333333333https://www.brildor.com/media/catalog/product/m/_/m_quina-estampaci_n-sellos-l9-3800-d7.jpgen_26344en_26363en_43619en_50434/Arts & Crafts/Arts & Crafts/Stamps/Arts & Crafts/Machines/Stamps and Seals2023-07-17T11:20:46+0000
