
Resins for Doming
Flexible and rigid transparent polyurethane resins with glossy finish.
They provide volume achieving 3D effect on flat prints for magnets, nameplates, bookmarks...
- Bicomponent format for mixing: resin + hardener

Related Products
More information about Resins for Doming
INDEX
DESCRIPTION
- Suitable for covering printed designs. They allow to form a solid transparent bubble over the print, like a dome that adds dimension to the print
- Recommended for customisations with a size and shape that do not require precision in the application, but a larger amount of resin drop
- Application on flat, smooth, non-porous surfaces
- Supplied in bottles with safety caps to prevent misuse
- Recommended for projects that require greater use of resin droplets
THINGS TO KEEP IN MIND
- Once you have mixed the resin and hardener in the right proportion you will get a ready to apply mixture of: 1 litre of flexible resin and 750 ml of rigid resin
- Do not add more hardener than the indicated proportion
- Clean the work surface beforehand and level it to make sure that the resin is evenly distributed
- Wear gloves to avoid skin irritation
- It is advisable to allow the resin to dry for 24 hours to prevent damage
- The date on the canisters corresponds to the date of manufacture
STORAGE RECOMMENDATIONS
In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:
- Cool place with an average temperature between 15 ºC and 25 ºC
- Dry environment with humidity less than 50%
- Do not expose to UV light
PRECAUTIONS BEFORE OPENING
- Upon receipt of the package from the transport agency, wait 24 hours before opening the jars of this product. During this time, keep them in a cool, dry place, without moving them
TIPS AND TRICKS
- Apply the resin from the edge of the design inwards. In the case of very small designs, place them in the centre
- To break up any bubbles that may appear during the application of the resin, apply heat with a blowtorch
- Add pigments or glitter to the mixture to personalise the resin
COMPARISON OF DOMING RESINS
Choose between one type or another, depending on the specific needs of each project.
Reference | 053382 | 053383 |
Type |
Resin flexible | Rigid resin |
Mixing ratio |
1:1 Mix equal quantities of resin and hardener |
2:1 Mix 2 parts of resin to 1 part of hardener |
Format bi-component (bottles) |
resin 500 ml hardener 500 ml |
resin 500 ml hardener 250 ml |
Flexibility after of curing |
More | Less |
Applications |
Allows some deformation or manipulation |
Stiffer finish and durable |
Resistance |
Resistant to impact and wear |
May be more prone to cracking or breaking if bent or flexed too much |
Finish |
Smooth and lightly elastic |
Solid and with a more robust appearance |
Examples |
Labels that will adhere to garments o surfaces curves |
Vehicle emblems or labels that will not have a lot of flexing |
Weight (g) |
1096 | 819 |
Ref. | 951861 |
---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!