More information about the Polaroid Sublimable Photo Frame Natural Wood

INDEX

> Description

> Please note

> Hints and tips

> Dimensions

> Recommended sublimation instructions and settings

DESCRIPTION

• Perfect for displaying photographs from weddings, first communions, christenings, Mother's Day, Father's Day, Valentine's Day...
• The sublimable side is lighter and glossier than the back
• Rounded corners and edges
• Transparent acrylic stands for displaying the photo frame on a tabletop. They are placed on the side of the photo frame
• The photo frames and the stand can also be customised with other techniques: laser engraving, DTF, screen printing, adhesive vinyl...

PLEASE NOTE

• The photo frames may include a protective paper layer and the stands may include a protective film; both are easily removed
• As this is natural wood, the colour and grain may vary from piece to piece
• The photo frames do not include stands or adhesives; these are purchased separately
• They do not include a back. Attach the photograph with double-sided tape, washi tape, glue or another adhesive

HINTS AND TIPS

• Create original magnets by attaching a magnetic sheet to the back of the photo frame once customised
• Place the photo frame on an easel for a more original display

PHOTO FRAME DIMENSIONS

STANDS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND SETTINGS

The settings shown are for guidance only. We recommend carrying out preliminary tests to make the necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 180 °C
• Remove the protective paper layer, if present
• Place the photo frame on the base of the press and the printed design on the customisable side. Secure it with heat-resistant tape
• Close the press with medium pressure for 60 seconds
• Using a protective glove, remove the freshly printed photo frame
• Carefully remove the paper
• Apply double-sided tape to the back of the photo frame, attach the photograph and press for a few seconds