The store will not work correctly in the case when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy.
If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
Accept All
More Info
Plastisol Bases for Textures & Effects - Brildor
Plastisol bases for textile screen printing designed for textured finishes and special effects.
Phthalate-free
Mixable with plastisol inks.
Sold in tubs of different sizes: 500 g , 1 kg , 5 kg or 10 kg
More information
Our availability is not enough?
Let us know how much you need
Request Notice
Index
Description
Things to keep in mind
Curing recommendations
Technical application data
Application instructions for the Puff base
Container dimensions
Data sheets
DESCRIPTION
The bases allow you to achieve textured finishes and special effects on fabrics:
Texture: puff effect, high-density, and raised relief
Special visual effects: reflective, glitter, ultra-elastic, and transparent, which reduces colour
Easy to use. Mix with plastisol inks to obtain the desired texture or effect.
It does not air dry. It needs to be cured.
Excellent wash fastness
Manufactured in Turkey in cooperation with Brildor
THINGS TO KEEP IN MIND
It is important to mix the appropriate amount of base and ink to prevent the design from washing off or cracking when stretched.
It is recommended to use screens with normal thread mesh (T) and to apply the mixture with a V-shaped squeegee or lance (P5).
CURING RECOMMENDATIONS
You can use a flash cure unit, an oven or a heat press. It is recommended to avoid using the press for textured bases as it may flatten them.
Place paper or teflon over the design. You will find it in Related Products
Heat at 160ºC for 90 seconds
TECHNICAL APPLICATION DATA(*)
Plastisol Base
Mesh (T)
Squeegee (Shores)
Mixture (%)
Curing (ºC-s)
Notes
Puff
34-43
V - 60-80
30
160 - 90
Requires 20% clear base
High-Density
24-34
V - 60-80
-
160 - 90
The amount needed depends on the desired density.
Reflective
30-60
V - 60-80
15-20
160 - 90
Glitter
12-24
V - 60-80
15-25
160 - 90
Ultra-Elastic
34-43
V - 60-80
20
160 - 90
Suitable for spandex and extra stretchy fabrics
Clear
43-120
V - 60-80
20
160 - 90
(*) Approximate measurements for guidance purposes only. We recommend prior testing to adjust these parameters according to the desired results.
PUFF BASE APPLICATION INSTRUCTIONS 040432 - REF. 040253)
Mix the puff base as follows:
40% Brildor Plastisol Puff Base
30% Brildor Plastisol in the desired colour
20% Brildor Plastisol Clear Base (Ref. 040437 - Ref. 040257)
Use a 34T or 43T screen mesh (Ref. 944058 - Ref. 944045)
Apply 2 coats, drying between each one at 160ºC for 15 seconds with a pre-dryer flash or tunnel.
In case you need thinner to reduce the viscosity of the mixture, you may use it in a ratio of < 1% (Ref. 040435 - Ref. 040255).
CONTAINER DIMENSIONS
Tub (kg)
Container (cm)
0.500
Ø9.2 x 12.2
1
Ø11.2 x 14.5
5
20 x 25 x 15
10
Ø27 x 27
DATA SHEETS
More Information
Ref.
936649