More information about the sublimation mobile phone stand

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Sublimatable white side with glossy finish. Rear light or dark brown, depending on the lot
• Rounded edges
• Easy to assemble and transport
• Transparent methacrylate base 3 mm thick
• The stand and base can be customised with laser engraving, screen printing, adhesive vinyl, transfer, DTF and direct UV printing

THINGS TO KEEP IN MIND

• The customisable side has a clear plastic protective film that needs to be removed before sublimating. The film on some stands includes an additional layer of paper to further protect the surface. Easily removable
• The acrylic base has a protective paper that has to be removed if you personalise it or when you assemble the stand

DIMENSIONS

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mirror image
• Preheat the press to 200ºC
• Remove the clear protective plastic from the printable side
• Pre-press for 5-10 seconds
• Place the stand on the heat press with the paper's printed side against it. Fix it with heat-resistant tape
• Press for 60 seconds, medium-high pressure
• With the help of a protective glove, remove the sublimated stand
• Carefully remove the paper and place the board on the acrylic base