More information about the Manual Rhinestone Applicators

INDEX

> Description

> Types of Nozzle

> What do the Rhinestone Applicators include?

> Technical Data of the Applicator

> Instructions for Use

> Recommendations

DESCRIPTION

• Heat customisation tools for applying rhinestones on any type of material
• Electric and manual. Ergonomic pen-like shape
• Suitable for almost all types of rhinestones, strass stones, and studs with heat-activated adhesive, regardless of the material they are made from (glass, plastic, paste, metal...)
• Allows application of rhinestones in the size and shape of the included nozzles
• The rhinestone kit includes 36 acrylic diamond-shaped stones, in 12 colours and various sizes. Also includes tweezers, dotting pencils, and a tray to facilitate application

TYPES OF NOZZLE

WHAT DO THE RHINESTONE APPLICATORS INCLUDE?

TECHNICAL DATA OF THE APPLICATOR

INSTRUCTIONS FOR USE

• Screw the appropriate nozzle onto the applicator without applying force, use the nozzle size you need
• Place the rhinestone applicator on its stand, plug it into the power outlet, and turn it on by pressing the On/Off button
• The applicator will heat up in 2 minutes and reach the optimal working temperature.
• Position the stone with the adhesive side touching the material and carefully place the applicator with the preheated nozzle over the stone and press lightly
• Wait between 3 and 15 seconds for the adhesive to melt onto the surface. Depending on the size of the stone, more time may be needed to apply the heat
• Repeat the process until you achieve the desired design

RECOMMENDATIONS

• Place the applicator on the stand when it is hot
• If you wish to remove the rhinestones while hot, use the tweezers
• To change the nozzle, wait for the applicator to cool down or use a thermal glove