More information about the Lever Guillotine with Sliding Blade

INDEX

> Description

> Things to keep in mind

> Usage instructions

> Measurements

DESCRIPTION

• Very useful for cutting paper, photos, cardstock, vinyl... in crafts, scrapbooking, and other projects
  
• Base markings with A4 and A5 cutting formats, ruler in centimetres and inches, and guide for cutting at an angle up to 45º
• Folds to occupy less space
• Plastic structure with a metal base

GUILLOTINE

• Capable of cutting up to 10 sheets of paper at once
• Safety latch that locks the lever when not in use
• Plastic clamp that holds the paper while cutting
• Plastic protective barrier to safeguard fingers during cutting

SLIDING BLADE

• Different types of cuts for photos, invitations, coupons, tickets...
• Silver knob to rotate and select the type of cut:
  
  • Straight: lines without deviations for clean finishes
  • Wavy: creates a decorative wave-shaped cut
  • Perforated: cuts a line with perforations to facilitate material separation
• Easy to use: press the blade and slide it over the material to be cut
• Transparent plastic rail with a sliding system for cuts in both directions

THINGS TO KEEP IN MIND

• The sliding blade's cutting mode cannot be changed if it is in the cutting area. It must be placed in the start position and the knob turned

USAGE INSTRUCTIONS

GUILLOTINE

1. Unlock the guillotine safety latch located on the side of the base
2. Place the paper and press the safety clamp to hold the paper
3. Push the guillotine handle downwards
4. Lift the clamp and remove the paper
5. Lock the guillotine again

SLIDING BLADE

1. Place the blade head in the initial position (downwards)
2. Place the paper under the plastic rail for cutting
3. Adjust the desired blade (straight, wavy, or perforation) by turning the knob
4. Hold the paper using the blade head and move it sideways to cut

MEASUREMENTS