More information about the Sign Vinyl Cutting Tape

INDEX

> Description

> Things to keep in mind

> Measurements

> Instructions for use

DESCRIPTION

• Designed for signmaking work on irregular or complex surfaces, where it is not possible to predefine a pattern and the vinyl must be applied directly onto the base material
• Allows you to define cutting lines without using a cutter or cutting tools directly on the surface to be customised, preventing damage
• Removable adhesive, leaves no residue after removal
• Internal cutting thread resistant to tension. Does not fray or break during cutting
• Improves precision in joins, finishes, and separations between vinyl pieces
• Adapts well to curves and complex paths

THINGS TO KEEP IN MIND

• The cutting thread is designed for adhesive vinyl, not for rigid or thick materials
• Can be torn by hand for quicker application
• For a clean cut, pull the thread with a smooth, continuous motion. Avoid jerking

MEASUREMENTS

INSTRUCTIONS FOR USE

1. Place the tape on the surface following the exact line where you want to make the cut
2. Apply the adhesive vinyl, completely covering the cutting tape
3. Remove the cutting thread by pulling it continuously. The thread will precisely cut the vinyl from the base
4. Remove the tape remnants and excess vinyl