Loading..

Product was successfully added to your shopping cart.
€39.90

Cricut Engraving Tip + QuickSwap Housing

Ref. 039097

Cricut Engraving Tip + QuickSwap Housing

  • Cricut Engraving Tip + QuickSwap Housing - No. 41
  • Cricut Engraving Tip + QuickSwap Housing - Parts
  • Cricut Engraving Tip + QuickSwap Housing - Packaging
€39.90

Cricut Engraving Tip + QuickSwap Housing

Ref. 039097

Cricut Engraving Tool with Quick Swap™ housing for use with the Cricut Maker vinyl cutter.

  • Perfect for personalisation with monograms, texts, figures or embellishments.
  • You may use this housing with other tips compatible with this vinyl cutter.
  • Engrave a wide range of materials such as anodised aluminium, leather, faux leather, plastic, and many more.

More information

+ Read More
- Read Less
Availability:
  • Immediate: 0 units
  • Orders that exceed our availability are generally served in approx. 5/7 working days.

€39.90
/ Each Unit VAT not included
For each unit you buy, you will accumulate 0,60€ to redeem on your next order. Discover the Brildor Loyalty Program

Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

 

How do I get some discount balance?


As a Regular Brildor Member:

  • On orders up to €180, you may receive €0.20 for every €10 you spend
  • On orders over €180, you may receive €0.30 for every €10 you spend
  • We will give you an extra €10 if you make 10 purchases over €100


As a Premium Brildor Member:

If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

  • On orders up to €180, you may receive €0.25 for every €10 you spend
  • On orders over €180, you may receive €0.375 for every €10 you spend

  

Who are Premium Brildor Members?


If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

 

Terms and conditions of the Brildor Club

  • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
  • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
  • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
  • Balance expires after 6 months without making any purchase.
  • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
  • The cancellation of an order implies the loss of the balance generated in that purchase.
  • On a full-order return, the amount to be refunded will be the amount paid by the customer.
  • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
Cricut Engraving Tip + QuickSwap Housing Description

More information about the Cricut Engraving Tip with QuickSwap™ Housing

  • The tip marked with the number 41 is only compatible with Cricut Maker vinyl cutters, and can only be used with this tool holder.
  • No calibration required.
  • Make sure you choose the right cutting mat for the material you want to engrave.
  • The engraving function is available on Design Space® iOS and Android versions.

HOW TO CHANGE QUICKSWAP TIPS?

  • Press and hold the plunger on top of the housing until the tip is released.
  • Gently remove the tip from the tool holder.
  • While pressing the plunger, align flat areas on the new tip with the housing's flat sides.
  • Slide the tip into place.
  • Ensure the tip is firmly clamped.
  • Release the plunger to secure the tip.
  • Drop the housing into clamp “B”.

RECOMMENDATIONS

  • Do not press on the plunger to prevent the tip from coming out.
  • The engraving tip is sharp and must be handled carefully.
  • To minimise wear on the tip when engraving, the housing will be raised and rotate for a few seconds at regular intervals.
  • Be careful when handling engraved materials. Small fragments of the material may have come off. You can remove them with a lint roller or with a piece of adhesive tape.
  • If you observe irregularities on the edges after engraving, remove them with a polishing cloth or sandpaper (360-600 grit). We recommend you to try this on the back of the material beforehand, to make sure that it will not be scratched by this procedure.
  • Use compressed air or a soft cloth to remove any engraving residue that may have fallen into the vinyl cutter. Always wipe towards the outside of the machine.
  • Before engraving leather, smooth its surface with a dry sponge. This will soften its fibres, giving you better results.

Additional Information
Reference nº 039 097
Gross Weight (kg) 0.04
Billable Weight 0.0500
Post your question

Questions and Answers

There are no entries.

Cricut Engraving Tip + QuickSwap Housing Description

More information about the Cricut Engraving Tip with QuickSwap™ Housing

  • The tip marked with the number 41 is only compatible with Cricut Maker vinyl cutters, and can only be used with this tool holder.
  • No calibration required.
  • Make sure you choose the right cutting mat for the material you want to engrave.
  • The engraving function is available on Design Space® iOS and Android versions.

HOW TO CHANGE QUICKSWAP TIPS?

  • Press and hold the plunger on top of the housing until the tip is released.
  • Gently remove the tip from the tool holder.
  • While pressing the plunger, align flat areas on the new tip with the housing's flat sides.
  • Slide the tip into place.
  • Ensure the tip is firmly clamped.
  • Release the plunger to secure the tip.
  • Drop the housing into clamp “B”.

RECOMMENDATIONS

  • Do not press on the plunger to prevent the tip from coming out.
  • The engraving tip is sharp and must be handled carefully.
  • To minimise wear on the tip when engraving, the housing will be raised and rotate for a few seconds at regular intervals.
  • Be careful when handling engraved materials. Small fragments of the material may have come off. You can remove them with a lint roller or with a piece of adhesive tape.
  • If you observe irregularities on the edges after engraving, remove them with a polishing cloth or sandpaper (360-600 grit). We recommend you to try this on the back of the material beforehand, to make sure that it will not be scratched by this procedure.
  • Use compressed air or a soft cloth to remove any engraving residue that may have fallen into the vinyl cutter. Always wipe towards the outside of the machine.
  • Before engraving leather, smooth its surface with a dry sponge. This will soften its fibres, giving you better results.

Additional Information

Reference nº 039 097
Gross Weight (kg) 0.04
Billable Weight 0.0500
Post your question

Questions and Answers

There are no entries.

The legal stuff about cookies:


This message requires us to tell you about ourcookie policy.

If you continue browsing, we'll assume you accept it and think it's okay.

Don't worry, this message only comes up once.