More information about the Cone Thread Stand

INDEX

> Description

> Things to keep in mind

> Instructions for use

> Measurements

DESCRIPTION

THREAD HOLDERS

• Plastic desktop organiser. Perfect for keeping threads organised and visible
• Useful for domestic or professional sewing and embroidery machines
• Guides prevent tangles and facilitate the thread's progress to the sewing or embroidery machine
• Trays with numbered holes for organising thread. Useful for sequencing colours in embroidery projects
• Optimises colour changes and speeds up workflow
• 3 different thread guides to organise the thread path and prevent tangles and whipping. Can be used simultaneously or separately
• Thread lubricator. The thread passes through a pre-lubricated pad before reaching the machine. Reduces friction and minimises breakage
• Integrated metal thread cutter. Quickly cuts the thread after each use and holds the end in the spring to prevent tangles
• Extendable telescopic metal mast. Adjusts the height of the thread holder to the size of the cone to maintain the correct thread exit angle

PINS

• 20 vertical pins/spikes with accessories for placing cones:
  • Large stoppers: hold and centre the spool on the spike
  • Small spool stoppers: placed on top to prevent spools from wobbling
  • Non-slip rubber cone holders: secure the cone and cushion vibrations. Useful for large-hole cones
  • Horizontal spike pins: facilitate spool rotation for straight thread exit and constant tension

THINGS TO KEEP IN MIND

• A cross screwdriver is required for assembly, not included
• Lubricant for the pad is not included. You can find it in Related Products
• The holes have a spacing of 7 cm in the same row, while between rows there is a distance of 6 cm

INSTRUCTIONS FOR USE

1. Place the thread holder on a surface, near the machine
2. Extend the telescopic mast as required
3. Insert the spikes into the tray holes and place the thread guide in the indicated hole
4. Select the holder according to the type of bobbin
5. Pull the thread from the bobbin and pass it through the upper thread guide of the mast
6. Take it to the machine and thread as usual
7. Adjust the height of the thread holder and the thread path
8. Cut or hold the thread after use with the metal spiral of the mast

MEASUREMENTS