Loading..

Product was successfully added to your shopping cart.
€28.95

Sublimation Mould for military dog tags

Ref. 012311

Template for 24 ID tags of 28 x 51mm

  • Template for 24 ID tags of 28 x 51mm
€28.95

Sublimation Mould for military dog tags

Ref. 012311

A mould for personalisation using sublimation printing. It allows sublimating up to 24 ID tags at a time with total precision.

  • Made of aluminium and medium-density fibreboard (MDF).
  • Suitable for military-type ID tags of 3 x 5.1 cm
  • Mould dimensions: 21.5 x 35.8 x 2.2 cm

    More information about the sublimation mould for military dog tags.

    How to use this mould?

    + Read More
    - Read Less
    Availability:
    • Immediate: 2 units
    • Orders that exceed our availability are generally served in approx. 15 working days.

    €28.95
    / Each Unit VAT not included
    For each unit you buy, you will accumulate 0,40€ to redeem on your next order. Discover the Brildor Loyalty Program

    Brildor Club is a direct discount program for your purchases. Whenever you place an order (minimum purchase of €10), some discount balance will be generated into your customer account for you to use on your next purchase. The more you buy, the more you save.
    You will get access to the Brildor Club as soon as you register as a new customer, and will receive a €5 welcome balance.

     

    How do I get some discount balance?


    As a Regular Brildor Member:

    • On orders up to €180, you may receive €0.20 for every €10 you spend
    • On orders over €180, you may receive €0.30 for every €10 you spend
    • We will give you an extra €10 if you make 10 purchases over €100


    As a Premium Brildor Member:

    If you are a Premium Member of the Brildor Club, you will accumulate 25% more balance, so you can obtain:

    • On orders up to €180, you may receive €0.25 for every €10 you spend
    • On orders over €180, you may receive €0.375 for every €10 you spend

      

    Who are Premium Brildor Members?


    If over the last 12 months your purchases have exceeded €3,000, you will automatically be upgraded to the Premium Brildor Member category. This amount is checked daily. As soon as you reach it, you will become a Premium Member the day after.

     

    Terms and conditions of the Brildor Club

    • Loyalty balance will be added when placing an order with an immediate payment method (Credit/debit card, Paypal and Pagantis).
    • Your balance will show in the "Your credit" section inside "Your account", and you can use it by selecting "Payment methods".
    • You can use your balance without needing to have a minimum accumulated amount or reach a minimum order value. Nonetheless, you won't be able to get a higher discount than your order value.
    • Balance expires after 6 months without making any purchase.
    • The balance is calculated on the net amount of the purchase: excluding taxes, shipping, coupons, and promotional discounts.
    • The cancellation of an order implies the loss of the balance generated in that purchase.
    • On a full-order return, the amount to be refunded will be the amount paid by the customer.
    • If the return of the order is due to causes beyond the control of Brildor, the redeemed balance won't be restored. However, the balance generated with this purchase won't be removed.
    Sublimation Mould for military dog tags Description

    More information about the sublimation mould for military dog tags

    • Helps reduce production times and material losses.
    • Best suited for sublimation using a heat press.
    • Pressure-resistant brown wooden base. Very smooth surface, with glossy finish.
    • Aluminium base with 24 moulds in the form of a military ID tag.
    • Non-slip pad that will act as a shock absorber between the 2 bases, preventing any movement when applying pressure during thermal transfer.
    • In Related Products, you will find the ID tags you can sublimate with this template.
    • For easier use, it is recommended to prepare the design you want to print using the following Multi-Tag Production Template (.eps -3,28Mb).

    DIMENSIONS (APPROX.)

    Wooden base 21.5 x 35.8 x 1.9 cm
    Aluminium template 21.5 cm x 35.8 cm x 2 mm
    Mould for each tag 3 x 5.1 cm
    Pad 21.5 cm x 35.8 cm x 1 mm

    How to use the mould to sublimate military dog tags?

    • Print the design in mirror image. You can use an A4-size sheet if you want to print 21 tags or less.
    • Prepare the mould as follows: on the wooden base, place the pad with its black side facing down, and the aluminium base on top of it.
    • Insert the dog tags into the mould. Make sure that the holes in the tags are all facing the same direction.
    • Hold the paper's printed side against the mould. Attach with heat resistant tape to keep it from moving.
    • Preheat the press to 200ºC.
    • Place the mould on the press' lower plate.
    • Close the press at medium-heavy pressure for 60 seconds.
    • Using a protective glove, remove the mould with the newly printed tags from the press.
    • Carefully remove the paper from the mould.

    Additional Information
    Reference nº 012 311
    Net Weight (kg) 0.686
    Gross Weight (kg) 1.804
    Billable Weight 1.9844
    Dimensions (mm) 215 x 358
    Thickness (mm) 22
    Colour Brown, Brushed Silver
    Surface material Aluminium, Wood
    Items Moulds
    Post your question

    Questions and Answers

    There are no entries.

    Sublimation Mould for military dog tags Description

    More information about the sublimation mould for military dog tags

    • Helps reduce production times and material losses.
    • Best suited for sublimation using a heat press.
    • Pressure-resistant brown wooden base. Very smooth surface, with glossy finish.
    • Aluminium base with 24 moulds in the form of a military ID tag.
    • Non-slip pad that will act as a shock absorber between the 2 bases, preventing any movement when applying pressure during thermal transfer.
    • In Related Products, you will find the ID tags you can sublimate with this template.
    • For easier use, it is recommended to prepare the design you want to print using the following Multi-Tag Production Template (.eps -3,28Mb).

    DIMENSIONS (APPROX.)

    Wooden base 21.5 x 35.8 x 1.9 cm
    Aluminium template 21.5 cm x 35.8 cm x 2 mm
    Mould for each tag 3 x 5.1 cm
    Pad 21.5 cm x 35.8 cm x 1 mm

    How to use the mould to sublimate military dog tags?

    • Print the design in mirror image. You can use an A4-size sheet if you want to print 21 tags or less.
    • Prepare the mould as follows: on the wooden base, place the pad with its black side facing down, and the aluminium base on top of it.
    • Insert the dog tags into the mould. Make sure that the holes in the tags are all facing the same direction.
    • Hold the paper's printed side against the mould. Attach with heat resistant tape to keep it from moving.
    • Preheat the press to 200ºC.
    • Place the mould on the press' lower plate.
    • Close the press at medium-heavy pressure for 60 seconds.
    • Using a protective glove, remove the mould with the newly printed tags from the press.
    • Carefully remove the paper from the mould.

    Additional Information

    Reference nº 012 311
    Net Weight (kg) 0.686
    Gross Weight (kg) 1.804
    Billable Weight 1.9844
    Dimensions (mm) 215 x 358
    Thickness (mm) 22
    Colour Brown, Brushed Silver
    Surface material Aluminium, Wood
    Items Moulds
    Post your question

    Questions and Answers

    There are no entries.

    The legal stuff about cookies:


    This message requires us to tell you about ourcookie policy.

    If you continue browsing, we'll assume you accept it and think it's okay.

    Don't worry, this message only comes up once.