More information about the Black Sublimation Mug with White Patch

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Ideal as a souvenir, as well as a promotional gift for events or a present for special occasions such as birthdays, stag dos, etc.
• Cylindrical black body with a white band or panel, suitable for sublimation
• Can be personalised using a transfer press with 11 oz elements. Also suitable for sublimation oven using clamps, silicone sheets or shrink bags
• In Related Products you will find presentation or transport boxes for this mug

THINGS TO KEEP IN MIND

• If the design has a black background, there may be a visible colour difference between the mug’s black and the sublimated black. To reduce this effect, set the black value to 100% in Photoshop or any other design software

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters provided for guidance only. It is recommended to carry out preliminary tests to make the necessary adjustments before starting production.

USING A MUG PRESS

• Print the design in mirror mode
• Preheat the press to 200 ºC
• Place the printed paper around the mug and secure it with heat-resistant adhesive tape
• Close the press with medium-high pressure for 180 seconds
• With the help of a protective glove, remove the freshly printed mug
• Carefully remove the paper

USING A SUBLIMATION OVEN

• Print the design in mirror mode
• Preheat the oven to 180 ºC
• Place the printed paper around the mug and secure it with heat-resistant adhesive tape
• Adjust the clamp or place the mug in a shrink bag and heat with a heat gun. You can also use a silicone sheet
• Sublimate in the oven for 13-15 minutes
  
• With the help of a protective glove, remove the clamp, silicone sheet or shrink bag, as appropriate
• Carefully remove the paper from the mug