Some shipping restrictions must be solved. Please, check them out.
00
https://www.brildor.com/en/badges/machines-and-accessories/badge-making-machine-evolution.html21442Badge Making Machine - EVOLUTION<p><a name="know-more1"></a></p>
<h3>More information about the Evolution badge making machine</h3>
<ul>
<li>Tabletop machine. Can be placed on any table or support.</li>
<li>Easy to use and move.</li>
<li>Ready to use. Comes assembled. No installation needed.</li>
<li>Suitable to personalise and assemble button or special badges (triangular, oval, ...) of different sizes, ranging from 25 to 100 mm.</li>
<li>Allows you to work with a wide variety of models: pins, mirror, keyring, magnet, tabletop, bottle openers, etc.</li>
<li>Ergonomic hand-operated handle.</li>
<li>If you are starting your badge business and do not know which mould to chose, we recommend starting with <span class="azul-negrita">Ø</span><span class="azul-negrita">44 mm</span> and <span class="azul-negrita">Ø58 mm </span>round moulds.</li>
<li>Some aesthetic details of the machine may vary from those in the photos, without it affecting its functionality.</li>
</ul>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table border="0">
<tbody>
<tr>
<td>Machine</td>
<td class="azul-negrita">9 x 34.5 x 35.5 cm</td>
</tr>
<tr>
<td>Packaging</td>
<td class="azul-negrita">11 x 36.5 x 21.2 cm</td>
</tr>
</tbody>
</table>
<p></p>
<p><a name="know-more2"></a></p>
<h3>User instructions for the EVOLUTION badge making machine</h3>
<p><strong>STEP 1: ASSEMBLE THE MOULD<br /></strong></p>
<ol>
<li>Each mould is made of 3 parts. Identify and separate Part A, Part B and the Upper Part.</li>
<li>Place the Upper Part on the machine.</li>
<li>Make sure the fastening pin on the Upper Part matches the hole in the machine.</li>
<li>Place Part A in the slot marked as "A" and Part B in the slot "B".</li>
<li>Positioning pins for Part A and B must be placed inside the machine.</li>
</ol>
<p><strong>STEP 2: ASSEMBLE THE BADGES<br /></strong></p>
<ol>
<li>Place the <strong>front</strong> of the badge on Part A, with the sharp edge down. Then place the <strong>printed paper</strong>, that you will have previously cut with a cutter or die, and its transparent protective film.</li>
<li>Rotate the base until the Upper Part aligns with Part A. Hold the badge maker with one hand, push the lever down as far as it will go and pull it back up.</li>
<li>Place the <strong>back</strong> of the badge (pin, magnet, keyring, ...) on Part B, with the sharp edge up.</li>
<li>Try to align the Upper Part of the mould with the positioning pin to ensure its correct orientation. To make metal-backed pin badges or magnetic badges it is necessary to add one or two collets on Part B (depending on the thickness of the badge). These collets or washers are supplied with the moulds that require them.</li>
<li>Rotate the base of the machine until the Upper Part meets Part B. Push the lever down as far as it will go and pull it back up.</li>
<li>Rotate the base of the machine again and remove the badge.</li>
</ol>
<p><strong>RECOMMENDATIONS</strong></p>
<ul>
<li>When changing the Upper Part of the mould, it must be pulled downwards by applying pressure. Be careful that it does not fall on your fingers or hands.</li>
<li>Fingers should not be placed between the Upper Part and the bottom (Part A or B) of the mould. They could be pressed by an unintended action of the machine.</li>
</ul>https://www.brildor.com/media/catalog/product/m/a/maquina-para-chapas-evolution-d11.jpg149instock14914900Talent000https://www.brildor.com/media/catalog/product/m/a/maquina-para-chapas-evolution-d11.jpg1439417374173762011320602207692271025224252452527727082/BADGES/BADGES/Machines & Accessories
Bienvenido a la Tienda Brildor, máquinas y artículos personalizables
