More information about the 3-in-1 Craft Express Cap Heat Press

INDEX

> Features

> User manual

> Instructions for use

> Dimensions and technical data

> Certificates

> Warranty

FEATURES

• Designed for caps and hats: allows you to personalise baseball caps, trucker caps, bucket or bob hats, children's caps, etc.
• Modern design: small, lightweight and compact. Perfect for working anywhere, even in a shop in front of customers
• 3 interchangeable base plates: with 50 mm thick silicone pads. To fit different cap sizes and styles
• Intelligent automatic pressure system: detects the thickness of the material and applies pressure without manual adjustments
• Adjustable cap tensioner: holds and stretches the cap so it does not move during transfer. Prevents creases or areas of uneven pressure
• High-performance curved heating plate: adapts to the shape of the cap and distributes heat quickly and evenly across the entire surface
• Temperature and time control: with extra-large digital panel for precise adjustment. Allows switching between ºC and ºF
  • Custom A/B modes: saves the most used parameters for quick switching between projects
  • Parameter memory: retains the settings and temperature used in the last application
• Safe: includes emergency stop button and automatic shut-off after 30 minutes of inactivity
• Non-slip bases with suction cups: provide stability and prevent the press from moving on the work table during use

USER MANUAL

Craft Express 3-in-1 Cap Heat Press Manual (.pdf - 0.3 MB).

INSTRUCTIONS FOR USE

1. Select the most suitable base plate according to the type and size of cap
2. Place the cap and adjust it with the tensioner so that it is firm, stretched and crease-free
3. Place the design on the cap and secure it with heat-resistant tape
4. Plug in the heat press
5. Set the temperature and time from the touch screen
6. Save the setting in one of the custom A/B modes if you are going to repeat the same type of application
7. Wait for the press to reach the set temperature
8. Lower the heating plate to start pressing
9. When the time is up, pull the heating plate back and carefully remove the cap

DIMENSIONS AND TECHNICAL DATA

CERTIFICATES

• CE certification in compliance with EU regulations

WARRANTY

• As stipulated by law in: Terms and Conditions