Heat Press - Cricut Autopress

More information about the Heat Press - Cricut Autopress

INDEX

> Description

> Manual

> Things to keep in mind

> What does this press include?

> Instructions for use

> Print area template

> Warranty

> Technical data

> Press dimensions

> Related posts

DESCRIPTION

• Suitable for any customisation technique requiring heat transfer: sublimation, transfer, vinyl, DTF...
• Zero Effort closing system allows you to lower the heat plate easily even with 2 fingers and activate it by pressing the handle
  
• Control panel with 4 numbered buttons with preset temperature and time settings. You can edit them and save your own settings using the dials
• Automatic pressure adjustment
• Side lock button keeps the press closed when not in use. It must be pressed to open it
• Includes a silicone pad with a non-slip base for the base plate. Prevents the item to be customised from moving, protects the plate, and removes moisture
• Automatic shut-off after 13 min of inactivity
• Takes only 8 min to reach maximum temperature
• Ceramic-coated heat plate
• Sturdy steel structure with a plastic casing that does not burn when touched
• CE certification in compliance with the EU

MANUAL

Cricut AutoPress Instructions Manual (.pdf - 0.79 MB)

THINGS TO KEEP IN MIND

• Although it is suitable for applying the DTF technique, it is not suitable for curing the film. This is because the pressure adjustment is done automatically, preventing height adjustment
• The heat plate is slightly smaller than the lower plate
• To save a time and temperature setting, you must modify the preset setting and press the chosen numbered button for 3 seconds
• Before using it for the first time, you must activate the press and the control panel in Design Space by connecting it to your computer
• The timer is activated by pressing the handle of the press
• The red light indicates that the control panel is not connected or that the press is locked

WHAT DOES THIS PRESS INCLUDE?

INSTRUCTIONS FOR USE

1. With the help of a computer, register the press in Cricut's Design Space. You can download it from this link
2. Access new product setup and select heat press
3. Select the Cricut AutoPress
4. Connect the USB cable from the control panel to your computer. It will be connected when the letters USB appear on the control
5. Press activate and wait for the press to activate
6. Remove the control panel from the computer
7. Connect the press to the power supply
8. Connect the USB cable from the panel to the back of the press 
9. Unlock and turn on the press
10. Place the pad on the press plate and the item to be customised on the pad
11. Place the vinyl, transfer paper, or design to be transferred on the item
12. Wait for the press to heat up
13. Make the appropriate time and temperature settings for the material to be customised or press one of the buttons with preset settings
14. Wait for the orange light to turn green
15. Close the press and press the handle to activate the timer
16. When the pressing time is over, the press will open automatically

PRINT AREA TEMPLATE

To assist you with stamping, we provide the following template with the maximum print area of the press. To view the layers of the template, open the PDF file using Photoshop

• Cricut AutoPress Print Area Template (.pdf - 0.66 MB)

WARRANTY

• As stipulated by law in: General Terms and Conditions for the Sale of Goods

TECHNICAL DATA

PRESS DIMENSIONS

RELATED POSTS

Which transfer press should I buy?

The best transfer press for each technique