More information about the heart-shaped photo rock slate for sublimation

INDEX

> Description

> Things to keep in mind

> Dimensions

> Recommended instructions and parameters for sublimation printing

DESCRIPTION

• Perfect for modern and rustic decor, as well as a gift for Valentine's or Mother's Day, a wedding, an anniversary or a birthday
• Bevelled edges that show the uneven cuts of the stone, simulating the marks of a chisel
• Both models include 2 black plastic stands to place the photo slate on flat surfaces
• The Ref. 036114 photo slate has 2 holes at the top to insert the jute cord that comes with it. It can be hung on the wall or placed on a table
• White printable side delimited by an irregular border. Back in black
• Can be personalised with a heat press or vacuum membrane sublimation oven
• Durable and long-lasting natural stone
• Supplied wrapped in air bubbles inside a cardboard box

THINGS TO KEEP IN MIND

• It may have some slight irregularities on its surface due to the natural morphology of the rock from which it is extracted
• It is recommended to use a Nomex pad when sublimating with a heat press machine

DIMENSIONS

* Measurements are indicative due to the natural morphology of the product.

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters are given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

WITH A HEAT PRESS

• Prepare your design and print it in mirror image
• Preheat the press to 200ºC
• Place the Nomex pad on the press’ lower platen and protective paper over it to prevent smudging
• Place the printed design face up on the Nomex pad and the photo slate face down in direct contact with the printed paper
• Fix them with heat-resistant tape
• Press for 9 minutes, medium-heavy pressure
• Remove the newly printed photo slate using a protective glove
• Carefully remove the paper

WITH A 3D OVEN

• Print the design in mirror image
• Preheat the oven to 200ºC
• Place the printed design face down on the white side of the photo slate and fix it with heat-resistant tape
• Put the photo slate on the top tray of the oven with the printed side facing upwards
• Close the membrane and create a vacuum. Make sure to get rid of any air bubbles
• Close the oven for 7-8 minutes
• Remove the newly printed photo slate using a protective glove
• Carefully remove the paper