€119.00 VAT not included / Each Unit

Heidi Swapp - Minc 12" Foil Applicator

Ref.
044900

Heidi Swapp Minc Foil Applicator designed to transfer reactive foil onto paper, cardstock, plastic film and more. It works as a laminator. Very useful for crafting and scrapbooking projects.

  • Resistant pink plastic structure.
  • Suitable for materials up to 0.6 mm thick.
  • Maximum work space: 33 cm (12")

More information

Availability:
Immediate: 0 units
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.
€119.00 VAT not included / Each Unit

More information about the Heidi Swapp’s 12” Minc Foil Applicator

  • ideal for adding metallic touches to labels, stickers, cards, folders, bookmarks, diary and notebook covers and so on.
  • Suitable for heat foiling the areas of the material where there is toner powder. The design where the foil will be applied with the machine must be pre-printed with a laser printer.
  • Includes a transfer folder to hold the project and prevent it from creasing when it is introduced into the laminator.
  • 5 settings to adjust the temperature according to the thickness of the material.
  • Comes in a cardboard box.

THINGS TO KEEP IN MIND

  • In addition to laminating with foil or other materials, the Heidi Swapp Minc can also be used to laminate documents. This requires just 2 special foil sheets, you have to place one on each side of the paper and feedi them into the machine.
  • The transfer folder is only required for laminating.

WHAT DOES THIS MACHINE INCLUDE?

1 Heidi Swapp - Minc 12" Foil Applicator
1 30 x 30 cm transfer folder
1 Gold reactive fold sheet
3 Starter tags
1 Plug adaptor
1 User manual

TECHNICAL DETAILS

Machine 47.3 x 7 x 14.6 cm
Work space width 33 cm
Heating time (max.) 1 minute
Heating time (min.) 2.5 minutes
Automatic shut-off 90 minutes
Working speed 30 cm/min
Max. temperature 160ºC
Power supply 100∼ 120 V
Motor noise <60 dB
Packaging 57.3 x 20 x 9.6 cm
Weight 3.611 kg

INSTRUCTIONS FOR USE

  1. Switch on the machine and use the gold button to select the setting.
  2. Wait for the red light to change to green. This means it is ready to work.
  3. Print your design with a laser printer.
  4. Cut the foil to the size of the design. It should cover its entire surface.
  5. Open the transfer folder and place the material in the centre.
  6. Lay the foil over the design. Make sure the metallic side is facing upwards.
  7. Close the transfer folder and smooth out the ripples, making sure that the printer toner is completely covered.
  8. Feed the transport folder through the front slot until it meets the rollers.
  9. Wait for it to come out of the back slot.
  10. Take your project out of the folder and remove the foil to reveal the result.

RECOMMENDATIONS FOR USE

  • Avoid using materials thicker than 0.6 mm.
  • Test the machine with scrap sheets before final foil application.
  • Cover the whole printed design to prevent toner from sticking to the transfer folder when it gets hot.
  • Feed the transport folder in as straight as possible. In case of a jam, use the forward and reverse switch.
  • Place thicker projects on the joint of the transfer folder.
  • Avoid laminating staples, clips, clasps, eyelets and any other type of metallic object. 
More Information
Ref. 044900
Net Weight (kg) 3.611
Gross Weight (kg) 4.015
Billable Weight (kg) 4.4170
Write Your Own Review
Post your question