The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
For small designs and/or with details, it may be convenient to use a high tack application tape, which you will find in Related Products
Let the paper dry for approx. 10 minutes after printing. Transfer it to the garment once the ink is dry to the touch
The printable side does not contain the watermark
TRANSFER PARAMETERS
Temperature: 180-200ºC
Pressure: 5 bar [high]
Time: 30-40 seconds
Important: If using an application tape, press for 3-5 seconds first, remove the tape and press again
APPLICATION INSTRUCTIONS
PAPER PRINTING
Select plain paper or a better setting
Print the design in direct mode
Let the ink dry for about 10 minutes, until dry to the touch
TRANSFER
Cut the outline of the design using scissors, a cutter or a cutting machine. If you use a plotter, you will have to weed or remove the parts you do not want to transfer
Preheat the press to 180-200ºC
Cover the lower platen with protective paper
Remove the backing paper from the transfer paper
Pre-press the garment for 4- 5 seconds to remove wrinkles and moisture from the fabric
Place the printed design on the garment with the unprinted side in contact with the t-shirt. Fix it with heat-resistant tape
Cover with protective or silicone paper
Press for 30-40 seconds, high pressure. If using an application tape, press for 3-4 seconds first, remove the tape and press again
Open the press and let it cool down
Remove the silicone or the protective paper when cold