Suitable for any customisation technique requiring heat transfer: sublimation, transfer, vinyl, DTF...
Zero Effort closing system allows you to lower the heat plate easily even with 2 fingers and activate it by pressing the handle
Control panel with 4 numbered buttons with preset temperature and time settings. You can edit them and save your own settings using the dials
Automatic pressure adjustment
Side lock button keeps the press closed when not in use. It must be pressed to open it
Includes a silicone pad with a non-slip base for the base plate. Prevents the item to be customised from moving, protects the plate, and removes moisture
Automatic shut-off after 13 min of inactivity
Takes only 8 min to reach maximum temperature
Ceramic-coated heat plate
Sturdy steel structure with a plastic casing that does not burn when touched
Although it is suitable for applying the DTF technique, it is not suitable for curing the film. This is because the pressure adjustment is done automatically, preventing height adjustment
The heat plate is slightly smaller than the lower plate
To save a time and temperature setting, you must modify the preset setting and press the chosen numbered button for 3 seconds
Before using it for the first time, you must activate the press and the control panel in Design Space by connecting it to your computer
The timer is activated by pressing the handle of the press
The red light indicates that the control panel is not connected or that the press is locked
WHAT DOES THIS PRESS INCLUDE?
1
Silicone pad
1
Control panel with USB cable of 99 cm
1
Cable with European plug of 1.9 m
1
Cable with UK plug of 1.9 m
1
User manual
INSTRUCTIONS FOR USE
With the help of a computer, register the press in Cricut's Design Space. You can download it from this link
Access new product setup and select heat press
Select the Cricut AutoPress
Connect the USB cable from the control panel to your computer. It will be connected when the letters USB appear on the control
Press activate and wait for the press to activate
Remove the control panel from the computer
Connect the press to the power supply
Connect the USB cable from the panel to the back of the press
Unlock and turn on the press
Place the pad on the press plate and the item to be customised on the pad
Place the vinyl, transfer paper, or design to be transferred on the item
Wait for the press to heat up
Make the appropriate time and temperature settings for the material to be customised or press one of the buttons with preset settings
Wait for the orange light to turn green
Close the press and press the handle to activate the timer
When the pressing time is over, the press will open automatically
PRINT AREA TEMPLATE
To assist you with stamping, we provide the following template with the maximum print area of the press. To view the layers of the template, open the PDF file using Photoshop
https://www.brildor.com/en/heat-press-cricut-autopress44843Heat Press - Cricut Autopress<p class="enlace"><a id="know-more"></a> </p>
<h2>More information about the Heat Press - Cricut Autopress</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Manual</a></p>
<p>> <a href="#know-more3">Things to keep in mind</a></p>
<p>> <a href="#know-more4">What does this press include?</a></p>
<p>> <a href="#know-more5">Instructions for use</a></p>
<p>> <a href="#know-more6">Print area template</a></p>
<p>> <a href="#know-more10">Warranty</a></p>
<p>> <a href="#know-more7">Technical data</a></p>
<p>> <a href="#know-more8">Press dimensions</a></p>
<p>> <a href="#know-more9">Related posts</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Suitable for any customisation technique requiring heat transfer: <span class="azul-brildor-negrita">sublimation</span>, <span class="azul-brildor-negrita">transfer</span>, <span class="azul-brildor-negrita">vinyl</span>, <span class="azul-brildor-negrita">DTF</span>...</li>
<li>Zero Effort closing system allows you to lower the heat plate easily even with 2 fingers and activate it by pressing the handle<strong><br></strong></li>
<li>Control panel with 4 numbered buttons with preset temperature and time settings. You can edit them and save your own settings using the dials</li>
<li>Automatic pressure adjustment</li>
<li>Side lock button keeps the press closed when not in use. It must be pressed to open it</li>
<li>Includes a silicone pad with a non-slip base for the base plate. Prevents the item to be customised from moving, protects the plate, and removes moisture</li>
<li>Automatic shut-off after <span class="azul-negrita">13 min</span> of inactivity</li>
<li>Takes only <span class="azul-negrita">8 min</span> to reach maximum temperature</li>
<li>Ceramic-coated heat plate</li>
<li>Sturdy steel structure with a plastic casing that does not burn when touched</li>
<li>CE certification in compliance with the EU</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>MANUAL<br></strong></p>
<p><a title="Cricut AutoPress Instructions Manual (.pdf - 0.79 MB)" href="https://www.brildor.com/media/upload/descargas/Manual_Usuario_Plancha_Plana_Cricut_AutoPress_ES.pdf" target="_blank" rel="nofollow noopener">Cricut AutoPress Instructions Manual (.pdf - 0.79 MB)</a></p>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Although it is suitable for applying the <span class="azul-brildor-negrita">DTF</span> technique, it is not suitable for <strong>curing the film</strong>. This is because the pressure adjustment is done automatically, preventing height adjustment</li>
<li>The heat plate is slightly smaller than the lower plate</li>
<li>To save a time and temperature setting, you must modify the preset setting and press the chosen numbered button for <span class="azul-negrita">3 seconds</span></li>
<li>Before using it for the first time, you must activate the press and the control panel in Design Space by connecting it to your computer</li>
<li>The timer is activated by pressing the handle of the press</li>
<li>The red light indicates that the control panel is not connected or that the press is locked</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>WHAT DOES THIS PRESS INCLUDE?</strong></p>
<table>
<tbody>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Silicone pad</td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Control panel with USB cable of <span class="azul-negrita">99 cm</span></td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Cable with European plug of <span class="azul-negrita">1.9 m</span></td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>Cable with UK plug of <span class="azul-negrita">1.9 m</span></td>
</tr>
<tr>
<td><span class="azul-negrita">1</span></td>
<td>User manual</td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more5"></a> </p>
<p><strong>INSTRUCTIONS FOR USE</strong></p>
<ol>
<li>With the help of a computer, register the press in Cricut's <strong>Design Space</strong>. You can download it from this <a href="https://help.cricut.com/hc/es-419/articles/360009428814-Descargar-e-instalar-Design-Space" target="_blank" rel="nofollow noopener">link</a></li>
<li>Access new product setup and select heat press</li>
<li>Select the Cricut AutoPress</li>
<li>Connect the USB cable from the control panel to your computer. It will be connected when the letters <strong>USB</strong> appear on the control</li>
<li>Press <strong>activate</strong> and wait for the press to activate</li>
<li>Remove the control panel from the computer</li>
<li>Connect the press to the power supply</li>
<li>Connect the USB cable from the panel to the back of the press </li>
<li>Unlock and turn on the press</li>
<li>Place the pad on the press plate and the item to be customised on the pad</li>
<li>Place the vinyl, transfer paper, or design to be transferred on the item</li>
<li>Wait for the press to heat up</li>
<li>Make the appropriate time and temperature settings for the material to be customised or press one of the buttons with preset settings</li>
<li>Wait for the orange light to turn green</li>
<li>Close the press and press the handle to activate the timer</li>
<li>When the pressing time is over, the press will open automatically</li>
</ol>
<p> </p>
<p class="enlace"><a id="know-more6"></a> </p>
<p><strong>PRINT AREA TEMPLATE<br></strong></p>
<p>To assist you with stamping, we provide the following template with the <strong>maximum print area</strong> of the press. To view the layers of the template, open the PDF file using Photoshop</p>
<ul>
<li><a title="Cricut AutoPress Print Area Template" href="https://www.brildor.com/media/upload/descargas/Plantilla_Area_Impresion_Plancha_Transfer_Cricut_AutoPress.pdf" target="_blank" rel="nofollow noopener">Cricut AutoPress Print Area Template (.pdf - 0.66 MB)</a></li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more10"></a> </p>
<p><strong>WARRANTY</strong></p>
<ul>
<li>As stipulated by law in: <a href="https://www.brildor.com/en/general-terms-and-conditions-for-the-sale#warranty" target="_blank" rel="noopener">General Terms and Conditions for the Sale of Goods</a></li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more7"></a> </p>
<p><strong>TECHNICAL DATA<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Press model</strong></td>
<td>Cricut AutoPress</td>
</tr>
<tr>
<td><strong>Type of press</strong></td>
<td>Clamshell</td>
</tr>
<tr>
<td><strong>Type of base plate</strong></td>
<td>Fixed</td>
</tr>
<tr>
<td><strong>Controller</strong></td>
<td>Independent digital panel</td>
</tr>
<tr>
<td><strong>Base plate dimensions (cm)</strong></td>
<td><span class="azul-negrita">39.5 x 32 cm</span></td>
</tr>
<tr>
<td><strong>Heat plate dimensions</strong></td>
<td><span class="azul-negrita">38 x 30.5 cm</span></td>
</tr>
<tr>
<td><strong>Maximum print area</strong></td>
<td><span class="azul-negrita">38 x 30.5 cm<br></span></td>
</tr>
<tr>
<td><strong>Maximum thickness to press</strong></td>
<td><span class="azul-negrita">5 cm</span><span class="azul-negrita"><br></span></td>
</tr>
<tr>
<td><strong>Pad thickness</strong></td>
<td><span class="azul-negrita">1 cm</span></td>
</tr>
<tr>
<td><strong>Maximum opening angle</strong></td>
<td><span class="azul-negrita">62º</span></td>
</tr>
<tr>
<td><strong>Temperature range<br></strong></td>
<td><span class="azul-negrita">0-205 ºC </span>/ <span class="azul-negrita">0-400 ºF </span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more8"></a> </p>
<p><strong>PRESS DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Press closed</strong></td>
<td><span class="azul-negrita">42.5 x 15 x 66</span> <span class="azul-negrita">cm</span></td>
</tr>
<tr>
<td><strong>Press open</strong></td>
<td><span class="azul-negrita">42.5 x 63.5 x 66</span> <span class="azul-negrita">cm</span></td>
</tr>
<tr>
<td><strong>Packaging</strong></td>
<td><span class="azul-negrita">78 x 53 x 25.5</span> <span class="azul-negrita">cm</span></td>
</tr>
<tr>
<td><strong>Net weight</strong></td>
<td><span class="azul-negrita">21.32</span> <span class="azul-negrita">kg</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more9"></a> </p>
<p><strong>RELATED POSTS</strong></p>
<p><a title="Which transfer press should I buy?" href="https://www.brildor.com/blog/es/que-plancha-transfer-debo-comprar/" target="_blank" rel="nofollow noopener">Which transfer press should I buy?</a></p>
<p><a title="The best transfer press for each technique" href="https://www.brildor.com/blog/es/la-mejor-plancha-transfer-para-cada-tecnica/" target="_blank" rel="nofollow noopener">The best transfer press for each technique</a></p>https://www.brildor.com/media/catalog/product/p/l/plancha-plana-cricut-autopress.jpg742.98instock742.98742.9800000https://www.brildor.com/media/catalog/product/p/l/plancha-plana-cricut-autopress.jpg2020148513/Heat Presses/Heat Presses/Clam Heat Presses2022-06-27T13:13:33+0000