More information about the sublimation polar fleece jacket

• High neck fleece lining great for cold days, as well as sports and mountain or outdoor activities.
• Anti-pilling fabric that maintains the quality of the garment for longer.
• 2 waist drawstrings.
• Full-zip fastening up to the collar. With ribbon puller for easy up and down.
• Elastics cuffs and side pockets.
• Lightweight fleece fabric with soft touch.
• Also suited for personalisation using embroidery, rhinestones, transfer, textile vinyl, screen printing or Direct-to-Garment printing (DTG).

THINGS TO KEEP IN MIND

• Due to its aesthetic details, it is advisable to sublimate the jacket in specific areas. The pockets and the zip is may cause difficulties for the complete printing process of the garment.

TIPS & TRICKS

• Sometimes sublimation paper may leave marks on the jacket after pressing. The foam pad creates a cushioning layer and helps to reduce these marks. You will find it in Related Products.
• To avoid ghosting caused by slight shifts in the paper during the heat transfer, use temporary adhesive spray that you will also find in Related Products.

SIZE CHART

^(*) Measurements in centimetres. Approximate measurements for guidance purposes only. They may vary slightly due to common irregularities in the garment manufacturing process.

WASHING RECOMMENDATIONS

• Wash at a maximum temperature of 40ºC
• Avoid using bleach.
• Air dry.

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image.
• Preheat the press to 200°C
• Clean the garment with a lint roller to remove dust and impurities that could stain the fabric.
• Place protective paper inside the jacket so that the design does not sublimate on the back.
• Place the jacket on the press' lower platen and the paper's printed side against it.
• Press for 40-50 seconds, medium pressure.
• Remove the newly printed jacket using a protective glove.
• Remove the paper carefully.