More information about Epoxy Resins for Crafts

INDEX

> Description

> Things to keep in mind

> Storage recommendations

> Precautions before opening

> Tips and tricks

> Technical data

DESCRIPTION

• Thermosetting polymers similar to methacrylate. High resistance to water, wear, scratches, impact and deformation
• Self levelling formula. Fills any space creating a smooth and uniform layer
• UV resistant. Non-yellowing
• Supplied in bottles with safety caps to prevent misuse

THINGS TO KEEP IN MIND

• Once you have mixed the resin and hardener in the correct ratio, you will get a ready-to-use mixture of 480 ml
• Do not add more hardener than the indicated ratio
• Wear gloves to avoid skin irritation
• It is advisable to allow at least 24 hours for curing
• The date on the cans corresponds to the date of manufacture
• The container should be 50 % larger than the mixture to allow sufficient space for stirring

STORAGE RECOMMENDATIONS

In order for this product to maintain its chemical properties and not suffer alterations, the storage space should comply with the following conditions:

• Cool place with an average temperature between 15 ºC and 25 ºC
• Dry environment with humidity less than 50%
• Do not expose to UV light

PRECAUTIONS BEFORE OPENING

• Upon receipt of the package from the transport agency, wait 24 hours before opening the jars of this product. During this time, keep them in a cool, dry place, without moving them.

TIPS AND TRICKS

• Pigments the resin with specific dyes to obtain a wide range of colours and decorative effects
• Work in smaller quantities to prevent the mixture from hardening
• Mix the resin slowly for about 3 minutes to avoid the formation of bubbles
• To break up any bubbles that may appear during resin application, apply heat with a blowtorch

TECHNICAL DATA