Round gem of translucent epoxy resin sublimable on the flat side. The sublimated image can be seen as domed, achieving a 3D effect
Matching silver plated anchor chain with clasp carabiner
Made of Zamakone alloy from zinc with aluminium, magnesium y copper
Includes sheet adhesive double-sided for attaching the gem on the pendant after sublimation
DIMENSIONS
Art. no.
038505
038507
Model
Leaves
Flower
Pendant (cm)
4,1 x 4,5
3,2 x 3,5
Gem (cm)
Ø2
Ø2
Chain (cm)
0,1 x 50
0,1 x 51,5
Type of chain
Ancora
Ancora
Print area (cm)
Ø2,4
Ø1,8
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters are given as a guide only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
Print the design in direct mode
Preheat the press to 180 ºC
Place the printed design on the base or flat part of the gem. Fix them with adhesive heat tape
Place the gem on the lower platen of the press with the base facing upwards
Close the press with medium pressure for 180 seconds
With the help of a protective glove remove the freshly sublimed gem the freshly sublimated
Carefully peel off the paper
After cooling, place the adhesive on the double-sided on the base of the gem and adhere it inside the frame of the pendant
https://www.brildor.com/en/sublimation-necklaces-gem-epoxy-resin26254Sublimation Necklaces with Gem from Epoxy Resin<p><a name="saber-mas"></a></p>
<h2>More information about Sublimation Necklaces with Gem from Epoxy Resin</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Dimensions</a></p>
<p>> <a href="#saber-mas3">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Round gem of translucent epoxy resin sublimable on the flat side. The sublimated image can be seen as domed, achieving a 3D effect</li>
<li>Matching silver plated anchor chain with clasp carabiner</li>
<li>Made of Zamakone alloy from zinc with aluminium, magnesium y copper</li>
<li>Includes sheet adhesive double-sided for attaching the gem on the pendant after sublimation</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td><strong>Art. no.</strong></td>
<td style="text-align: center;">038505</td>
<td style="text-align: center;">038507</td>
</tr>
<tr>
<td><strong>Model</strong></td>
<td style="text-align: center;">Leaves</td>
<td style="text-align: center;">Flower</td>
</tr>
<tr>
<td><strong>Pendant (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">4,1 x 4,5</span></td>
<td style="text-align: center;"><span class="azul-negrita">3,2 x 3,5</span></td>
</tr>
<tr>
<td><strong>Gem (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">Ø2</span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø2</span></td>
</tr>
<tr>
<td><strong>Chain (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">0,1 x 50 </span></td>
<td style="text-align: center;"><span class="azul-negrita">0,1 x 51,5 </span></td>
</tr>
<tr>
<td><strong>Type of chain</strong></td>
<td style="text-align: center;"><span class="azul-negrita"> Ancora</span></td>
<td style="text-align: center;"><span class="azul-negrita"> Ancora</span></td>
</tr>
<tr>
<td><strong>Print area (cm)</strong></td>
<td style="text-align: center;"><span class="azul-negrita">Ø2,4 </span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø1,8</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters are given as a <strong>guide</strong> only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<ul>
<li>Print the design in <strong>direct mode</strong></li>
<li>Preheat the press to <span class="azul-negrita">180 ºC</span></li>
<li>Place the printed design on the base or flat part of the gem. Fix them with adhesive heat tape</li>
<li>Place the gem on the lower platen of the press with the base facing upwards</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">180 seconds</span></li>
<li>With the help of a protective glove remove the freshly sublimed gem the freshly sublimated</li>
<li>Carefully peel off the paper</li>
<li>After cooling, place the adhesive on the double-sided on the base of the gem and adhere it inside the frame of the pendant</li>
</ul>
<p> </p>
<p><strong>RELATED POSTS<br></strong></p>
<p><a title="Más de 10 ideas de regalos personalizables para San Valentín" href="https://www.brildor.com/blog/es/mas-10-ideas-regalos-personalizables-san-valentin/" target="_blank" rel="nofollow noopener">10+ customisable gift ideas for Valentine's Day</a></p>https://www.brildor.com/media/catalog/product/c/o/colgante-sublimacion-efecto-doming-d38.jpg2.95instock02.95000https://www.brildor.com/media/catalog/product/c/o/colgante-sublimacion-efecto-doming-d38.jpg21563255032622048783/Blanks/Blanks/Jewellery & Trinkets/Blanks/Mother's Day/Blanks/Valentine's Day/Blanks/Valentine's Day/Jewellery/Blanks/Mother's Day/Jewellery 2021-07-24T06:09:02+0000