The store will not work correctly in the case when cookies are disabled.
The legal stuff about cookies:
This message requires us to tell you about our cookie policy. If you continue browsing, we'll assume you accept it and think it's okay.
Don't worry, this message only comes up once.
A rectangular hand waving flag you can personalise using dye sublimation printing. Perfect for sporting events, celebrations, concerts, advertising, and many more.
Translucent white polyester fabric with a grammage of 48.25 gsm and a white plastic stick.
Sale unit: 10-flag pack.
Print area: 19 x 14 cm (Ref. 040520) and 78 x 28 cm (Ref. 040519).
Perfect for a wide range of different designs such as crests, photos, emblems or a company’s logo. Also great for advertising, rallies and merchandising, or to liven up and decorate local festivals, open-air events, and many more.
Lightweight, so it can be easily and comfortably carried around at any event.
It includes a hollow plastic stick with a sphere at the top. The stick can be easily removed and reattached to the flag.
Sewn hem through which the stick is inserted.
Suitable for sublimation on the shiny side of the fabric. The other side is matte.
DIMENSIONS (APPROX.)
Reference nº
040519
040520
Fabric
80 x 30 cm
21 x 30 cm
Stick
Ø0.7 x 60 cm
Ø0.5 x 30 cm
Print area
78 x 28 cm
19 x 14 cm
Flag weight
19 g
4 g
Pack weight
0.19 g
0.04 g
THINGS TO KEEP IN MIND
The seam of the flag, where the stick has to be placed, cannot withstand high temperatures. To avoid melting when sublimating the flag, this part should not be in contact with the press’ lower platen.
The flag’s fabric is semi-transparent. You can see the design printed on the front from the back of the flag.
If not already done, remember removing the plastic stick from the flag before sublimation.
Recommended instructions and parameters for sublimation printing
Print the design in mirror image.
Preheat the press to 200ºC.
Remove the stick from the hand flag.
Place the flag on the press’ lower platen, with its printable side facing up.
Position the printed design on the flag. Fix it with heat-resistant tape, so it doesn’t move.
Press for 45 seconds, medium-heavy pressure.
Open the press. Using a protective glove, remove the newly printed flag.