
Carbon Fibre Effect Adhesive Vinyl 2-3 Years
Carbon fibre effect vinyl for signage, suitable for both indoor and outdoor applications.
- Polymeric and calendered PVC of 110μ
- Suitable for smooth or slightly textured, non-porous surfaces
- Sold by the linear metre with a width of 30 cm and 61 cm

More information about the Carbon Fibre Effect Adhesive Vinyl 2-3 Years
INDEX
> Measurements per linear metre
> Recommended application instructions
DESCRIPTION
- Flexible vinyl ideal for vehicle interior signage, appliance decoration, furniture, and various objects
- Easy application even on curved pieces. Manually adheres to the surface to be labelled
- High durability: 2-3 years outdoors
- Permanent adhesive. Leaves no residue when removed
- Good resistance to low/high temperatures: -10 °C to +60 °C
- Presented on a polyethylene-coated backing or liner of 140 g/m2
THINGS TO KEEP IN MIND
- For orders over 30 m, the order is delivered in more than one roll
- For composite designs or those with details, it may be convenient to use a transfer tape, see Related Products
- Use a squeegee to adhere it to the surface and avoid air bubbles
TECHNICAL DATA
Vinyl | PVC calendered polymeric |
Vinyl thickness (μm) | 110 |
Backing or liner (g/m2) | 140, polyethylene |
Adhesive thickness (μm) | 40 |
Outdoor durability | 2-3 years |
Temperature resistance (°C) | -10 to 60 |
MEASUREMENTS PER LINEAR METRE
Ref. | 035227 | 035226 |
Width (cm) | 30 | 61 |
Weight (g) | 103.6 | 210 |
STORAGE RECOMMENDATIONS
- Store in a place with a temperature between 18 and 25 °C and a relative humidity of 50%
- It can be stored for up to 1 year in the original packaging if the recommendations are followed
RECOMMENDED APPLICATION INSTRUCTIONS
On the cutting plotter:
- Place the vinyl on the cutting plotter, with the coloured side facing up and aligned
- Send the cutting job to the plotter (recommended pressure: 100-110 gf)
- Cut it from the roll and remove it from the plotter
On the work table:
- Discard the excess vinyl
- Cover the design with the transfer tape
- Use a squeegee to apply adequate pressure for perfect adhesion without bubbles
- Turn the vinyl over and carefully remove the backing sheet. You are now ready to apply the vinyl
On the surface to be labelled:
- Ensure the application surface is clean, free of dust and grease. Use an alcohol-based cleaner to remove grease
- Carefully position the vinyl on the surface to be labelled. Spraying a little water beforehand will make it easier to reposition if you make a mistake
- With the help of the squeegee, ensure the entire surface adheres well and without bubbles
- Finally, carefully remove the transfer tape
TECHNICAL SHEET
Technical sheet of the 5-year adhesive cutting vinyl - Carbon fibre effect (.pdf - 0.157MB)
RELATED POSTS
Ref. | 922646 |
---|
Reviews
Share your opinion
It will only take a minute, and your opinion can help other customers.
Sign in to submit your review
Write a review
Rating
Add photos of your product (optional)
Sending review...
Error
Review sent Thank you for your interest!
Questions
No questions found for this product.
Be the first to ask a question!
Ask a question
Please complete the CAPTCHA
Submitting your question...
Error
Question Submitted Thank you for your interest!