Sublimation Bracelet with Safety Clasp - Pack of 10 units
Starting at: €1.12/ Each Unit
Share
Sublimation Bracelet with Safety Clasp - Pack of 10 units
Ref.
034947
Fabric bracelet you can personalise using dye sublimation printing. Includes a non-return safety clasp, which prevents the bracelet from opening once it is fastened to the wrist.
More information about the wristband with safety clasp for sublimation
THINGS TO KEEP IN MIND
It is necessary to remove the clasp to sublimate the ribbon. It slides in the opposite direction to the teeth on the inside, both to remove it and to place it after personalisation
DIMENSIONS (APPROX.)
Fabric strip (cm)
35.5 x 1.5
Clasp (cm)
1.2 x 1 x 1
Print area (cm)
35.5 x 1.5
Pack weight (g)
18
Recommended instructions and parameters for sublimation printing
Print the design in mirror image
Preheat the press to 200ºC
Remove the safety clasp by pulling it out from the opposite side to the inside teeth
Place the printed part of the paper on the wristband and fix it with thermal adhesive tape
Press at a medium-high pressure for 35 seconds
With the help of a protective glove, remove the newly printed wristband
https://www.brildor.com/en/sublimation-bracelet-with-safety-clasp-pack-of-10-pcs22556Sublimation Bracelet with Safety Clasp - Pack of 10 units<p><a name="know-more"></a></p>
<h2><strong>More information about the wristband with safety clasp for sublimation<br></strong></h2>
<p> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>It is necessary to remove the clasp to sublimate the ribbon. It slides in the opposite direction to the teeth on the inside, both to remove it and to place it after personalisation</li>
</ul>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td>Fabric strip (cm)</td>
<td><span class="azul-negrita">35.5 x 1.5</span></td>
</tr>
<tr>
<td>Clasp (cm)</td>
<td><span class="azul-negrita">1.2 x 1 x 1</span></td>
</tr>
<tr>
<td>Print area (cm)</td>
<td><span class="azul-negrita">35.5 x 1.5</span></td>
</tr>
<tr>
<td>Pack weight (g)</td>
<td><span class="azul-negrita">18</span></td>
</tr>
</tbody>
</table>
<p><a name="know-more1"></a></p>
<h2><strong>Recommended instructions and parameters for sublimation printing<br></strong></h2>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200ºC</span></li>
<li>Remove the safety clasp by pulling it out from the opposite side to the inside teeth</li>
<li>Place the printed part of the paper on the wristband and fix it with thermal adhesive tape</li>
<li>Press at a <strong>medium-high pressure</strong> for <span class="azul-negrita">35 seconds</span></li>
<li>With the help of a <strong>protective glove</strong>, remove the newly printed wristband</li>
<li>Carefully peel off the paper</li>
</ul>https://www.brildor.com/media/catalog/product/p/u/pulsera-tela-cierre-de-seguridad-pack-10-uds.jpg1.49outofstock1.491.4900000https://www.brildor.com/media/catalog/product/p/u/pulsera-tela-cierre-de-seguridad-pack-10-uds.jpg2112622697252022687144107/Blanks/Blanks/Jewellery & Trinkets/Blanks/Parties/Blanks/Fiestas y Festivales2021-07-24T05:40:41+0000