More information about the Sublimable Mobile Ring Holder

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Ring holder for gripping the mobile by hand or placing it on a tabletop
• Includes a sublimable aluminium sheet with a glossy white finish
• Adhesive on both sides: one to attach the customised sheet and the other to secure the holder to the phone
• Once attached to the mobile, the base can rotate 360º
• You can purchase more customisable sheets for this holder in Related Products (Ref. 038970)
  

THINGS TO KEEP IN MIND

• The sheet has a protective film on the customisable side that must be removed before sublimating

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated as guidelines. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Remove the protective plastic from the customisable side of the sheet
• Place the sheet on the press and the printed side of the paper on the white side of the sheet. Secure it with thermal adhesive tape
• Close the press with medium pressure for 40 seconds
• With the help of a protective glove, remove the freshly sublimated sheet
• Carefully remove the paper
• Peel off the protective paper covering the top adhesive and attach the sheet
• Peel off the protective paper covering the back adhesive and secure the holder to the mobile