Made of ceramic which makes the drink take longer to heat up. Perfect for cold drinks
Large stirrup handle to ensure a more secure grip
Low jugs have a reinforced base that protrudes from the body. Concave shaped rim to better preserve the aroma of the beer
Tall, narrow jug with dimpled or wave-like relief on the bottom. Slightly conical body, almost imperceptible
Customisable with transfer plate and sublimation oven. In Related Products you will find clamps, silicone sheets and shrink bags
In Related Products you can find presentation and shipping boxes. The special box for mugs is suitable for all 3 models (Ref. 053839). While the box for 2 cups is only suitable for mugs with Ref. 003839 and 053967
THINGS TO KEEP IN MIND
The tall carafe Ref. 000128 is suitable for customising with 11 oz. heating elements. To personalise the low mug Ref. 003839 you must use a Ø9,4 cm diameter and 9 cm height resistor
The jugs with references 053967 and 003839 are very similar. They differ in:
Size and capacity
Shape of the handle: the smaller one is semi-square while the larger one is rounded
Base: one is completely white while the other is not (it has an unglazed pink rim
DIMENSIONS
000128
003839
053967
Maximum capacity (oz ≈ ml)
17 ≈ 500
21≈ 600
23 ≈ 700
Outer diameter (cm)
Ø8
Ø8.7
Ø8
Inner diameter (cm)
Ø7.2
Ø7.2
7,2
Height (cm)
16
9.7
14,4
Thickness (mm)
3
3
4
Handle (cm)
1.8 x 10
2.3 x 8.9
2,2 x 10
Stein-to-handle distance (cm)
3.4
3
5
Print area (cm)
22.4 x 10.2
27 x 10.5
22,4 x 10,2
Weight (g)
612
691
684
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Parameters provided as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.
WITH A MUG HEAT PRESS (Ref. 000128)
Print the design in mirror image
Preheat the press to 180ºC
Hold the paper's printed side against the stein and fix it with heat-resistant tape
Press for 300 seconds, medium-heavy pressure
Remove the newly printed stein using a protective glove
Remove the paper carefully
WITH A SUBLIMATION OVEN
Print the design in mirror image
Preheat the press to 180ºC
Hold the paper's printed side against the stein and fix it with heat-resistant tape
Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet
Sublimate it in the oven for 13 - 15 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessories you used
https://www.brildor.com/en/sublimation-beer-stein-ceramic27834Sublimation Beer Stein- Ceramic<p><a name="know-more"></a></p>
<h2>More information about the ceramic beer mug for sublimation</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Made of ceramic which makes the drink take longer to heat up. Perfect for cold drinks</li>
<li>Large stirrup handle to ensure a more secure grip</li>
<li>Low jugs have a reinforced base that protrudes from the body. Concave shaped rim to better preserve the aroma of the beer</li>
<li>Tall, narrow jug with dimpled or wave-like relief on the bottom. Slightly conical body, almost imperceptible</li>
<li>Customisable with transfer plate and sublimation oven. In <strong>Related Products</strong> you will find clamps, silicone sheets and shrink bags</li>
<li>In Related Products you can find presentation and shipping boxes. The special box for mugs is suitable for all 3 models (Ref. 053839). While the box for 2 cups is only suitable for mugs with Ref. 003839 and 053967</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The tall carafe Ref. 000128 is suitable for customising with <span class="azul-negrita">11 oz</span>. heating elements. To personalise the low mug Ref. 003839 you must use a <span class="azul-negrita">Ø9,4 cm</span> diameter and <span class="azul-negrita">9 cm</span> height resistor</li>
<li>The jugs with references 053967 and 003839 are very similar. They differ in:<br>
<ul>
<li>Size and capacity</li>
<li>Shape of the handle: the smaller one is semi-square while the larger one is rounded</li>
<li>Base: one is completely white while the other is not (it has an unglazed pink rim</li>
</ul>
</li>
</ul>
<p> </p>
<p> </p>
<p><strong>DIMENSIONS</strong></p>
<table>
<tbody>
<tr>
<td> </td>
<td><strong>000128</strong></td>
<td><strong>003839</strong></td>
<td><strong><strong>053967</strong></strong></td>
</tr>
<tr>
<td><strong>Maximum capacity (oz ≈ ml)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">17 ≈ 500</span></td>
<td style="text-align: center;"><span class="azul-negrita">21≈ 600</span></td>
<td style="text-align: center;"><span class="azul-negrita">23 ≈ 700</span></td>
</tr>
<tr>
<td><strong>Outer diameter (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">Ø8 </span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø8.7 </span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø8</span></td>
</tr>
<tr>
<td><strong>Inner diameter (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">Ø7.2 </span></td>
<td style="text-align: center;"><span class="azul-negrita">Ø7.2 </span></td>
<td style="text-align: center;"><span class="azul-negrita">7,2</span></td>
</tr>
<tr>
<td><strong>Height (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita">16 </span></td>
<td style="text-align: center;"><span class="azul-negrita">9.7 </span></td>
<td style="text-align: center;"><span class="azul-negrita">14,4</span></td>
</tr>
<tr>
<td><strong><strong>Thickness (mm)<br></strong></strong></td>
<td style="text-align: center;"><span class="azul-negrita">3 </span></td>
<td style="text-align: center;"><span class="azul-negrita">3 </span></td>
<td style="text-align: center;"><span class="azul-negrita">4</span></td>
</tr>
<tr>
<td><strong><strong>Handle (cm)<br></strong></strong></td>
<td style="text-align: center;"><span class="azul-negrita">1.8 x 10 </span></td>
<td style="text-align: center;"><span class="azul-negrita">2.3 x 8.9 </span></td>
<td style="text-align: center;"><span class="azul-negrita">2,2 x 10</span></td>
</tr>
<tr>
<td><strong><strong>Stein-to-handle distance (cm)<br></strong></strong></td>
<td style="text-align: center;"><span class="azul-negrita">3.4 </span></td>
<td style="text-align: center;"><span class="azul-negrita">3 </span></td>
<td style="text-align: center;"><span class="azul-negrita">5</span></td>
</tr>
<tr>
<td><strong>Print area (cm)<br></strong></td>
<td style="text-align: center;"><span class="azul-negrita"> 22.4 x 10.2 </span></td>
<td style="text-align: center;"><span class="azul-negrita">27 x 10.5 </span></td>
<td style="text-align: center;"><span class="azul-negrita">22,4 x 10,2</span></td>
</tr>
<tr>
<td><strong><strong>Weight (g)<br></strong></strong></td>
<td style="text-align: center;"><span class="azul-negrita">612</span></td>
<td style="text-align: center;"><span class="azul-negrita">691</span></td>
<td style="text-align: center;"><span class="azul-negrita">684</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p>Parameters provided as a <strong>guideline</strong>. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.</p>
<p><strong>WITH A MUG HEAT PRESS (Ref. 000128)<br></strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span></li>
<li>Hold the paper's printed side against the stein and fix it with heat-resistant tape</li>
<li>Press for <span class="azul-negrita">300 seconds</span>, <strong>medium-heavy</strong> pressure</li>
<li>Remove the newly printed stein using a protective glove</li>
<li>Remove the paper carefully</li>
</ul>
<p><strong>WITH A SUBLIMATION OVEN<br></strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">180ºC</span></li>
<li>Hold the paper's printed side against the stein and fix it with heat-resistant tape</li>
<li>Adjust the clamp, or place the mug in a heat shrink bag and heat it with a heat gun. Make sure you get rid of all the wrinkles. You can also use a silicone sheet</li>
<li>Sublimate it in the oven for <span class="azul-negrita">13</span> - <span class="azul-negrita">15 minutes</span></li>
<li>Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessories you used</li>
<li>Carefully remove the paper from the stein</li>
</ul>https://www.brildor.com/media/catalog/product/j/a/jarra-blanca-de-cerveza-para-sublimacion-d8.jpg3.95instock03.95000https://www.brildor.com/media/catalog/product/j/a/jarra-blanca-de-cerveza-para-sublimacion-d8.jpg22995248352620842377488555150551871/Blanks/Blanks/Beer Steins & Tumblers/Blanks/Father's Day/Blanks/Beach/ World Cup 2022/Blanks/Father's Day/Mugs & Beer Steins/Blanks/Beer Steins & Tumblers/Beer Steins/Blanks/Termos, Bidones y Jarras/Blanks/Mugs, Beer Steins & Tumblers2021-07-24T06:01:00+0000
