More information about the ZIG WAY Glue Pens

INDEX

> Description

> Fine Tip Pen

> Tips and Tricks

> Measurements

> Instructions for Use

DESCRIPTION

• Especially useful for craft and scrapbooking projects
• Suitable for materials such as paper, foam, foil, confetti, glitter, rhinestones...
• Thanks to their composition, they are perfect for sticking photographs, making them particularly useful for project life
• Composition: acrylic emulsion and water. Acid and xylene-free
• Dual use:
• Permanent: when liquid, it turns blue. Apply and let it dry for a few minutes
• Repositionable: when dry, it becomes transparent and turns into a reusable and temporary adhesive. It is characterised by its ability to remove and reposition a material adhered to a surface. Useful for labelling, restoring adhesion on cutting mats, and making fabric and vinyl samples...
• Presented in a cardboard blister with a hole for hanging on a display

ZIG FINE TIP GLUE PEN 7.39 ml (REF. 040537)

• Recommended for projects requiring medium tracing
• Suitable for lettering on invitations, decorative albums, diaries, notebooks...
• Fine pad tip
• Easy to use. Press the tip onto the surface to be glued to start dispensing the glue
• Clip-type tab on the cap for hanging

TIPS AND TRICKS

• For storage, it is recommended to remove glue residue from the tip, and store them vertically with the cap and tip facing down
• Use them vertically to ensure the glue dispenses evenly
• Apply the foil calligraphy or lettering technique with foil. Write on a surface and let it dry until the glue is completely transparent. Place the foil with the silver side down and press with a bone folder. Remove the foil and check that all the letters achieve the metallic effect

MEASUREMENTS

INSTRUCTIONS FOR USE

PERMANENT

1. Press the pen or marker tip onto the surface to be glued until the tip turns blue or the glue starts to come out
2. Spread the glue over the desired area. Replace the cap once finished to prevent drying
3. Before it dries, place the material you want to fix onto the glue
4. Avoid moving the glued object or material until the glue dries
5. When it appears completely transparent, it will be correctly adhered

SEMI-PERMANENT OR REPOSITIONABLE

1. Press the pen or marker tip onto the surface to be glued until the tip turns blue or the glue starts to come out
2. Spread the glue over the desired area. Replace the cap once finished to prevent drying
3. Spread the glue over the desired surface or object
4. Wait for it to dry until completely transparent
5. Touch the glue slightly and you will notice a tacky texture. You will have obtained the repositionable glue
6. You can now stick and unstick the material as many times as necessary without leaving any residue