Perfect for placing your phone or tablet on your office desk, at home or anywhere else
Dual function design: as a stand for smart devices and as an organiser with slots and hooks to charge the phone and store keys, earphones or watches
Black back and edges
Easy to assemble and carry
The pieces of the stand fit together perfectly, keeping it stable on any flat surface
THINGS TO KEEP IN MIND
The printable surface comes with a transparent plastic film. It must be peeled off before sublimation
Although it does not interfere with print quality, the edges may contain some residue from the laser cut and stain when touched. If this happens, it is recommended to clean them with a damp cloth before personalising it
DIMENSIONS
Assembled stand (cm)
28 x 20 x 13
Front piece (cm)
28 x 19.6 x 0.2
Base piece (cm)
28 x 13.6 x 0.2
Front print area (cm)
28 x 19.6
Base print area (cm)
28 x 13.6
Stand weight (g)
285
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Print the design in mirror image
Preheat the oven to 180ºC
Remove the transparent plastic film from both pieces
Place them on the lower platen of the press and the paper's printed side against them. Secure them with heat-resistant tape so they do not move
Press for 60-80 seconds, medium-heavy pressure
Using a protective glove, remove the newly printed stand
https://www.brildor.com/en/sublimation-wooden-desk-organiser-phone-holder27518Sublimation Wooden Desk Organiser with Phone Holder<p><a name="know-more"></a></p>
<h2>More information about the sublimation desk organiser with phone holder</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="know-more1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Perfect for placing your phone or tablet on your office desk, at home or anywhere else</li>
<li>Dual function design: as a stand for smart devices and as an organiser with slots and hooks to charge the phone and store keys, earphones or watches</li>
<li>Black back and edges</li>
<li>Easy to assemble and carry</li>
<li>The pieces of the stand fit together perfectly, keeping it stable on any flat surface</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>The printable surface comes with a transparent plastic film. It must be peeled off before sublimation</li>
<li>Although it does not interfere with print quality, the edges may contain some residue from the laser cut and stain when touched. If this happens, it is recommended to clean them with a damp cloth before personalising it</li>
</ul>
<p> </p>
<p class="enlace"><a id="know-more3"></a> </p>
<p><strong>DIMENSIONS<br></strong></p>
<table>
<tbody>
<tr>
<td><strong>Assembled stand (cm)<br></strong></td>
<td class="azul-negrita"><strong>28 x 20 x 13</strong></td>
</tr>
<tr>
<td><strong>Front piece (cm)<br></strong></td>
<td class="azul-negrita"><strong><strong>28 x 19.6 x 0.2</strong><br></strong></td>
</tr>
<tr>
<td><strong><strong>Base piece (cm)<br></strong></strong></td>
<td class="azul-negrita"><strong><strong>28 x 13.6 x 0.2</strong></strong></td>
</tr>
<tr>
<td><strong><strong>Front print area (cm)<br></strong></strong></td>
<td class="azul-negrita"><strong><strong>28 x 19.6<br></strong></strong></td>
</tr>
<tr>
<td><strong><strong><strong>Base print area (cm)<br></strong></strong></strong></td>
<td class="azul-negrita"><strong><strong><strong>28 x 13.6</strong></strong><br></strong></td>
</tr>
<tr>
<td><strong>Stand weight (g)<br></strong></td>
<td class="azul-negrita"><strong>285 <br></strong></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="know-more4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the oven to <span class="azul-negrita">180ºC</span></li>
<li>Remove the transparent plastic film from both pieces</li>
<li>Place them on the lower platen of the press and the paper's printed side against them. Secure them with heat-resistant tape so they do not move</li>
<li>Press for <span class="azul-negrita">60-80 seconds</span>, <strong>medium-heavy</strong> pressure</li>
<li>Using a protective glove, remove the newly printed stand</li>
<li>Carefully peel off the paper</li>
</ul>https://www.brildor.com/media/catalog/product/0/4/040140-soporte-para-m_vil-para-sublimaci_n-d12.jpg5.69instock5.695.6900000https://www.brildor.com/media/catalog/product/0/4/040140-soporte-para-m_vil-para-sublimaci_n-d12.jpg2428724290243262549749707/Blanks/Blanks/Smartphones & PC/Blanks/Mother's Day/Blanks/Father's Day/Blanks/Only at Brildor/Blanks/Father's Day/Phone & PC/Blanks/Mother's Day/Móviles y PC2021-07-24T05:58:52+0000
