More information about the Sublimable Spinners

INDEX

> Description

> Things to keep in mind

> Measurements

> Recommended sublimation instructions and parameters

DESCRIPTION

• Ideal as a keepsake or personalised gift for special occasions such as communions, baptisms, birthdays...
• Operates with a smooth spinning mechanism on its central axis
• Only the white side of the aluminium plates is sublimable. Silver-coloured reverse is not sublimable
• Spinner arm bases with adhesive to attach the sublimated plates
• Presented in a cardboard box with a transparent plastic inner support. CE marked

THINGS TO KEEP IN MIND

• The customisable side of the plate has a protective film that must be removed before sublimation
• It is recommended to carefully attach the plate to the base. Once adhered, it may break if attempting to remove it
• The round plate of Ø17.8 mm is smaller than those of the spinner, but adheres perfectly to its base

MEASUREMENTS

RECOMMENDED SUBLIMATION INSTRUCTIONS AND PARAMETERS

Parameters indicated are for guidance only. It is recommended to conduct preliminary tests to make necessary adjustments before starting production.

• Print the design in mirror mode
• Heat the press to 200 ºC
• Place the plates on the press base with the printed side of the paper on the plates
• Close the press at a medium pressure for 40 seconds
• Using a protective glove, remove the freshly printed plates
• Carefully remove the sublimation paper
• Remove the protective papers from the adhesive on the spinner and place the personalised plates