€22.00 VAT not included / Each Unit

Epson Print Head Cleaning Kit for DTG and DTF printers


A maintenance kit, especially recommended for Epson SureColor SC-F2000, SC-F2100 DTG printers, and DTF systems using Epson L1800 and L805 printers.

  • Required for cleaning the covers and the area around the print head.
  • Includes 4 pairs of plastic gloves, 25 small cleaning sticks, 25 large cleaning sticks, 1 bottle of ink cleaning fluid (150 ml), and 1 plastic cup.
  • Epson Part no.: C13T736200

More information

Immediate: 10 units
Our availability is not enough?
Let us know how much you need
€22.00 VAT not included / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the Epson print head cleaning kit for DTG and DTF printers

  • Suitable for cleaning most inkjet printers on the market.
  • Comes in a white cardboard box.


Small stick
0.65 x 16.2 cm
Large stick 1.3 x 12.7 cm
Cleaning fluid
150 ml
Cup 100 ml
Packaging 17 x 17 x 7 cm
Kit weight 365 g


  • Put on the gloves, open the bottle of ink cleaning fluid, and pour a small quantity into the plastic cup.
  • Soak the cleaning stick with cleaning fluid.
  • Use the wet stick to clean the parts that require it: suction caps, unfinished ink cartridges removed from the printer, . . .


  • Turn on the printer.
  • When the printhead moves, remove the power cord to unlock it.
  • Remove the screw and take off the printhead’s cover from the printer.
  • Place absorbent paper under the printhead, and make sure it’s standing over it.
  • Remove the cartridges using a flat screwdriver but keep them in order.
  • Pour some cleaning fluid into the plastic cup.
  • Get a syringe with a tube and fill it with a small quantity of liquid.
  • Insert the tube in the nozzle and start injecting the fluid while being careful not to apply excessive pressure.
  • Repeat the process on every clogged nozzle.
  • Place all the parts back in place.
  • You may also want to clean the area where the printhead rests with a stick, as solid traces of ink may remain.
  • Turn on the printer.
More Information
Ref. 034220
Gross Weight (kg) 0.365
Billable Weight (kg) 0.3600
Write Your Own Review
Post your question