Suitable for customising with heat press using a resistance of 10-11 oz. Also with sublimation oven using mug wraps of 10-11 oz (Ref. 003908), silicone sheets o heat shrink bags
Packaged in a box cardboard box
THINGS TO KEEP IN MIND
Before personalising them you must take into account that the tone of the colours will be mixed with those of the image that you want to print. It is recommended to use a dark design to minimise this effect
Orca certification attached as a sticker on the base. It can be easily removed if desired
Due to the width of the mug the print area is reduced if sublimated with heat press using heating elements of 10-11 oz
DIMENSIONS (APPROX.)
Capacity (oz ≈ ml)
10 ≈ 300
Inner diameter (cm)
Ø8,1
Outside diameter (cm)
Ø8,8
Height (cm)
8,5
Base (cm)
Ø8,5
Thickness (cm)
0,3
Handle (cm)
1,2 x 6,2
Distance mug-handle (cm)
3
Print area (cm)
15 x 8,5 (press)
24,5 x 8,5 (oven)
Packaging (cm)
12 x 9,5 x 10
Weight (g)
344
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
WITH CUP GRIDDLE
Print on design in image mirror
Preheat the press to 200 °C
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Close the press with medium pressure for 180 seconds
With the help of a protective glove, remove the freshly stamped mug freshly printed
Carefully peel off the paper
WITH SUBLIMATION OVEN
Print the design in image mirror
Heat the oven to 200 °C
Hold the paper's printed side against the mug and fix it with heat-resistant tape
Adjust the wrap around it or slide it into a heat shrink bag and heat it with a heat gun. You can also use a silicone sheet
Sublime in the oven for 13-15 minutes
Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used
https://www.brildor.com/en/sublimation-mug-marble-effect49555Sublimation Mug - Marble Effect <p class="enlace"><a id="saber-mas"></a> </p>
<h2>More information about the Sublimation Mug - Marble Effect</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#saber-mas1">Description</a></p>
<p>> <a href="#saber-mas2">Things to keep in mind</a></p>
<p>> <a href="#saber-mas3">Dimensions (approx.)</a></p>
<p>> <a href="#saber-mas4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p class="enlace"><a id="saber-mas1"></a> </p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Suitable for customising with heat press using a resistance of <span class="azul-negrita">10-11 oz</span>. Also with sublimation oven using mug wraps of <span class="azul-negrita">10-11 oz </span>(Ref. 003908), silicone sheets o heat shrink bags</li>
<li>Packaged in a box cardboard box</li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas2"></a> </p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Before personalising them you must take into account that the tone of the colours will be mixed with those of the image that you want to print. It is recommended to use a dark design to minimise this effect</li>
<li>Orca certification attached as a sticker on the base. It can be easily removed if desired</li>
<li>Due to the width of the mug the print area is reduced if sublimated with heat press using heating elements of <span class="azul-negrita">10-11</span> <span class="azul-negrita"> oz</span></li>
</ul>
<p> </p>
<p class="enlace"><a id="saber-mas3"></a> </p>
<p><strong>DIMENSIONS (APPROX.)</strong></p>
<table>
<tbody>
<tr>
<td><strong>Capacity (oz ≈ ml)</strong></td>
<td><span class="azul-negrita">10 ≈ 300</span></td>
</tr>
<tr>
<td><strong>Inner diameter (cm)</strong></td>
<td><span class="azul-negrita">Ø8,1</span></td>
</tr>
<tr>
<td><strong>Outside diameter (cm)</strong></td>
<td><span class="azul-negrita">Ø8,8</span></td>
</tr>
<tr>
<td><strong>Height (cm)</strong></td>
<td><span class="azul-negrita">8,5</span></td>
</tr>
<tr>
<td><strong>Base (cm)</strong></td>
<td><span class="azul-negrita">Ø8,5</span></td>
</tr>
<tr>
<td><strong>Thickness (cm)</strong></td>
<td><span class="azul-negrita">0,3</span></td>
</tr>
<tr>
<td><strong>Handle (cm)</strong></td>
<td><span class="azul-negrita">1,2 x 6,2</span></td>
</tr>
<tr>
<td><strong>Distance mug-handle (cm)</strong></td>
<td><span class="azul-negrita">3</span></td>
</tr>
<tr>
<td style="vertical-align: middle;" rowspan="2"><strong>Print area (cm)</strong></td>
<td><span class="azul-negrita">15 x 8,5 </span>(press)<span class="azul-negrita"><br></span></td>
</tr>
<tr>
<td><span class="azul-negrita">24,5 x 8,5 </span>(oven)<span class="azul-negrita"><br></span></td>
</tr>
<tr>
<td><strong>Packaging (cm)</strong></td>
<td><span class="azul-negrita">12 x 9,5 x 10</span></td>
</tr>
<tr>
<td><strong>Weight (g)</strong></td>
<td><span class="azul-negrita">344</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p class="enlace"><a id="saber-mas4"></a> </p>
<p><strong>RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING</strong></p>
<p><strong>WITH CUP GRIDDLE</strong></p>
<ul>
<li>Print on design in <strong>image</strong> <strong> mirror</strong></li>
<li>Preheat the press to <span class="azul-negrita">200 °C</span></li>
<li>Hold the paper's printed side against the mug and fix it with heat-resistant tape</li>
<li>Close the press with <strong>medium pressure</strong> for <span class="azul-negrita">180 seconds</span></li>
<li>With the help of a protective glove, remove the freshly stamped mug freshly printed</li>
<li>Carefully peel off the paper</li>
</ul>
<p><strong>WITH SUBLIMATION OVEN</strong></p>
<ul>
<li>Print the design in <strong>image</strong> <strong> mirror</strong></li>
<li>Heat the oven to <span class="azul-negrita">200 °C</span></li>
<li>Hold the paper's printed side against the mug and fix it with heat-resistant tape</li>
<li>Adjust the wrap around it or slide it into a heat shrink bag and heat it with a heat gun. You can also use a silicone sheet</li>
<li>Sublime in the oven for <span class="azul-negrita">13-15 minutes</span><span class="azul-negrita"><br></span></li>
<li>Using a protective glove, remove the wrap, the silicone sheet, or the bag, depending on the accessory you used</li>
<li>Carefully peel off the paper of the mug</li>
</ul>
<div id="gtx-trans" >
<div class="gtx-trans-icon"> </div>
</div>https://www.brildor.com/media/catalog/product/t/a/taza-sublimacion-efecto-marmol.jpg2.95instock02.95000https://www.brildor.com/media/catalog/product/t/a/taza-sublimacion-efecto-marmol.jpg224422256723946361024885549569/Blanks/Blanks/Mugs/Blanks/Mugs/Special Colours Mugs/Blanks/Mugs, Beer Steins & Tumblers2023-01-24T14:35:50+0000
HOW TO SUBLIMATE CUPS and HOW MUCH it COSTS
