We R Memory Keepers - Spint It Pro Tumbler Turner

More information about the We R Memory Keepers Spin It Pro tumbler turner.

• Especially useful for applying resin, glue or paint evenly on the item’s surface. In Related Products, you will find the kit to prepare and apply resin.
• Rotating arm in a turbine shape made up of 4 propellers with springs to hold the object. Features padded propellers to prevent the cup from slipping.
• Blue ridged disc which acts as the base of the arm and holds it to the machine. Can be unscrewed to remove the arm and used as a holder to decorate the object outside the tool.
• Adjustable rotation speed through a wheel or dial at the back of the machine.
• Holds up to 368.5 g in weight.
• Includes multi-lingual instructions.

TIPS & TRICKS

• Use a low speed to dry paint evenly.
• Avoid drips by selecting a high speed.
• Unscrew the arm from the machine and spray paint or hydro dip it. Then put it back in the tool to apply resin.

TECHNICAL DETAILS

INSTRUCTIONS FOR USE

1. Tighten the arm springs with your hand and place the cup. Make sure it is secure.
2. Plug the USB cable into a power socket.
3. Adjust the rotation speed with the wheel at the back of the machine.
4. When it rotates, begin to coat the glass with liquid glue.
5. Sprinkle glitter or the desired decorative element on the glue while still wet. Do not let the arm stop spinning so that it spreads evenly.
6. Pour clear epoxy resin and use a stick or gloves to spread it all over the container^(*).
7. After the resin application, use the rotary motion of the machine to dry the resin. This process usually takes between 6 and 24 hours, depending on the resin.
8. When dry, remove the cup from the arm and unplug the machine.

^(*) The resin is self-levelling, i.e. although it may look uneven at first, it will even out as it rotates.

RECOMMENDATIONS FOR USE

• Always unplug the tool before changing cups.
• It is recommended that the arm does not stop rotating during the whole personalisation and drying process to avoid dripping.
• If the arm becomes loose, tighten it by turning the ridged wheel clockwise.
• The cup to be personalised should not be longer than 20.32 cm (8")
• Place newspaper or a rag on the machine's base to avoid staining it and protect the work surface.
• To remove the epoxy resin from the machine, scrape it off and clean the residue with acetone or isopropyl alcohol. Once removed, wipe off any remaining solvent with a damp cloth.