More information about the Sublimation Mug Presentation Box - Heart Handle

INDEX

> Description

> Things to keep in mind

> Important recommendations

> Template to personalise

> Dimensions (approx.)

> Recommended instructions and parameters for sublimation printing

> Related posts

DESCRIPTION

• Presentation box or packaging suitable for 1 mug. Especially useful for Valentine's Day, anniversaries, weddings, Mother's Day...
• Piece of thin cardboard with 2 handles heart-shaped die-cuts
• Protects and displays the mug and at the same time easy to transport
  
• Blister box with 2 tabs that are inserted inside the box to hold it in place mug
• Outer white ecru gloss finish, suitable for sublimation. Inside matte white
• Easy assembly. Just place the mug on the base, insert the tabs of each window into the interior of the window, and lift the sides mug and lift the sides until the windows are joined together handles
• You can also buy this model from box with a different handle different at Related Products

THINGS TO KEEP IN MIND

• It does not include mug
• To hold the sides together handles and close the box you can use adhesives, tape, staples, jute twine or double-sided staples, jute twine or tape, which you can find at Related Products

IMPORTANT RECOMMENDATIONS

The cardboard of this blister is coated on one side with a transparent film that can be sublimated. When exposed to temperatures above 150 °C, this film has a tendency to yellow. To reduce yellowing we recommend:

• Iron the entire surface of the blister to even out the colour. Even if you only print a part of the blister
• Make a printing full print. Hide the background colour with the design
• Use sublimation paper with a grammage100-105 ^g/m2 for best results

TEMPLATE FOR PERSONALISATION

Sublimatable blister template handle heart for mug (.pdf - 0,212 MB)

DIMENSIONS (APPROX.)

• The measurements of the maximum size of the mug should be taken as follows: width (diameter base + handle) x height x base (diameter)
  

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters indicated with as a guideline. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

• Print the design in mode mirror
• Preheat the press to 160 °C
• Pre-press the blister pack upside down for 10 seconds to remove the humidity from the cardboard
• Place the blister pack in the press with the shiny side up and the printed side of the blister on the shiny side of the blister. Paper on the shiny side of the blister. Secure with heat-sensitive tape
• Close the press with medium pressure for 80 seconds
• With the help of a protective glove, remove the blister from the blister pack sublimated
• Carefully peel off the paper

RELATED POSTS

Boxes for mugs personalised boxes: enhance the experience and sell more

10+ customisable Valentine's Day gift ideas