We have upgraded our system to a newer version. Please get in touch with us if you're having trouble locating an item.
€28.95 VAT not included / Each Unit

Sublimation Mould for military dog tags

Ref.
012311

A mould for personalisation using sublimation printing. It allows sublimating up to 24 ID tags at a time with total precision.

  • Made of aluminium and medium-density fibreboard (MDF).
  • Suitable for military-type ID tags of 3 x 5.1 cm
  • Mould dimensions: 21.5 x 35.8 x 2.2 cm

More information

How to use this mould?

Availability:
Inmmediate: 1 units
Is our availability not enough? Ask to be notified of upcoming entries.
Request Notice
€28.95 VAT not included / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the sublimation mould for military dog tags

  • Helps reduce production times and material losses.
  • Best suited for sublimation using a heat press.
  • Pressure-resistant brown wooden base. Very smooth surface, with glossy finish.
  • Aluminium base with 24 moulds in the form of a military ID tag.
  • Non-slip pad that will act as a shock absorber between the 2 bases, preventing any movement when applying pressure during thermal transfer.
  • In Related Products, you will find the ID tags you can sublimate with this template.
  • For easier use, it is recommended to prepare the design you want to print using the following Multi-Tag Production Template (.eps -3,28Mb).

DIMENSIONS (APPROX.)

Wooden base 21.5 x 35.8 x 1.9 cm
Aluminium template 21.5 cm x 35.8 cm x 2 mm
Mould for each tag 3 x 5.1 cm
Pad 21.5 cm x 35.8 cm x 1 mm

How to use the mould to sublimate military dog tags?

  • Print the design in mirror image. You can use an A4-size sheet if you want to print 21 tags or less.
  • Prepare the mould as follows: on the wooden base, place the pad with its black side facing down, and the aluminium base on top of it.
  • Insert the dog tags into the mould. Make sure that the holes in the tags are all facing the same direction.
  • Hold the paper's printed side against the mould. Attach with heat resistant tape to keep it from moving.
  • Preheat the press to 200ºC.
  • Place the mould on the press' lower plate.
  • Close the press at medium-heavy pressure for 60 seconds.
  • Using a protective glove, remove the mould with the newly printed tags from the press.
  • Carefully remove the paper from the mould.

More Information
Ref. 012311
Net Weight (kg) 0.686
Gross Weight (kg) 1.804
Billable Weight 1.9844
Dimensions (mm) 215 x 358
Thickness (mm) 22
Colour Brown, Brushed Silver
Surface material Aluminium, Wood
Items Moulds
Post your question