Sublimation Decorative Ceramic Plates

More information about the sublimation decorative ceramic plates

• Can be used as a nameplate in restaurants, catering establishments, counters, home décor and more
• Available in plain white (Ref. 041188 and 041189); and with gold trim and rim (Ref. 000080 and 000129)
• Can be personalised with a 3D sublimation vacuum heat press. You can also use a heat press machine for plates or with accessories suitable for sublimation
• You can display the plate with table stands or plate hangers, also available in Related Products

THINGS TO KEEP IN MIND

• Once it is sublimated, the plate is not suitable for food consumption
• Although it is possible to personalise the entire surface, it is advisable to only print on the inside base to ensure optimal results

TIPS & TRICKS

• Customise it with restaurant logos, names or slogans to promote your brand presence

DIMENSIONS (APPROX.)

^(*)Distance between the surface and the top edge of the plate placed on a table.

Recommended instructions and parameters for sublimation printing

PLATE HEAT PRESS

• Print the design in mirror image
• Preheat the press to 200ºC
• Place the printed paper on the plate and fix it with heat-resistant tape
• Position the plate and press for 180 seconds, medium-heavy pressure
• Remove the newly printed plate using a protective glove
• Carefully peel off the paper

3D SUBLIMATION VACUUM HEAT PRESS

• Print the design in mirror image
• Preheat the sublimation oven to 200C
• Place the printed paper on the plate and fix it with heat-resistant tape
• Put the plate in the oven to create a vacuum
• Remove the wrinkles that may have formed on the paper. To do so, press with your fingers from the inside out
• Sublimate inside the oven for 8 minutes
• After baking, open the oven and remove the membrane
• Remove the newly printed sublimating using a protective glove
• Carefully peel off the paper