https://www.brildor.com/en/sublimation-school-pencil-case-flap22793Sublimation School Pencil Case & Flap<p><a name="know-more"></a></p>
<h2>More information about the school pencil case for sublimation and its flap</h2>
<p> </p>
<p><strong>INDEX</strong></p>
<p>> <a href="#know-more1">Description</a></p>
<p>> <a href="#know-more2">Things to keep in mind</a></p>
<p>> <a href="#know-more3">Dimensions</a></p>
<p>> <a href="#know-more4">Recommended instructions and parameters for sublimation printing</a></p>
<p> </p>
<p><a name="know-more1"></a></p>
<p><strong>DESCRIPTION</strong></p>
<ul>
<li>Velcro <strong>flap fastening</strong></li>
<li><strong>3</strong> zipped <strong>compartments</strong>: 2 <strong>gusseted pockets</strong> and 1 full-opening compartment with <strong>elastic bands</strong> for storing school stationery</li>
<li>Easy personalisation The flap is attached to the pencil case by a <strong>velcro</strong> fastener that can be removed completely for sublimation</li>
</ul>
<p> </p>
<p><a name="know-more2"></a></p>
<p><strong>THINGS TO KEEP IN MIND</strong></p>
<ul>
<li>Leave the Velcro out of the press during sublimation</li>
<li>Cover the coloured part of the flap with protective paper to avoid burning or staining it during pressing</li>
</ul>
<p> </p>
<p><a name="know-more3"></a></p>
<p><strong>DIMENSIONS<br></strong></p>
<table>
<tbody>
<tr>
<td>Pencil case (cm)</td>
<td><span class="azul-negrita">20 x 13 x 6 <br></span></td>
</tr>
<tr>
<td>Flap (cm)</td>
<td><span class="azul-negrita">20 x 18<br></span></td>
</tr>
<tr>
<td>Gusset (cm)</td>
<td><span class="azul-negrita">20.5 x 6<br></span></td>
</tr>
<tr>
<td>Pocket 1 (cm)</td>
<td><span class="azul-negrita">18.5 x 9 x 2.5<br></span></td>
</tr>
<tr>
<td>Pocket 2 (cm)</td>
<td><span class="azul-negrita">18.5 x 9 x 3.5<br></span></td>
</tr>
<tr>
<td>Compartment with elastic bands (cm)</td>
<td><span class="azul-negrita">18 x 8<br></span></td>
</tr>
<tr>
<td>Flap print area (cm)</td>
<td><span class="azul-negrita">20 x 13<br></span></td>
</tr>
<tr>
<td>Weight (g)</td>
<td><span class="azul-negrita">96</span></td>
</tr>
</tbody>
</table>
<p> </p>
<p><a name="know-more4"></a></p>
<p><strong>Recommended instructions and parameters for sublimation printing</strong></p>
<ul>
<li>Print the design in <strong>mirror image</strong></li>
<li>Preheat the press to <span class="azul-negrita">200ºC</span></li>
<li>Cover the coloured part of the flap and the Velcro with protective paper and heat-resistant tape. If possible, leave the Velcro outside the press</li>
<li>Place the flap on the press' lower platen and the paper's printed side against it. Fix them with heat-resistant tape</li>
<li>Cover them with protective paper</li>
<li>Press for <span class="azul-negrita">45 seconds</span>, medium pressure</li>
<li>Using a protective glove, remove the newly printed flap</li>
<li>Carefully peel off the paper</li>
</ul>
<p> </p>
<p> </p>https://www.brildor.com/media/catalog/product/e/s/estuches-escolares-compartimentos-solapas-d1.jpg2.25instock02.25000https://www.brildor.com/media/catalog/product/e/s/estuches-escolares-compartimentos-solapas-d1.jpg19122300/Blanks/Blanks/Back to School/Blanks/Stationery2021-07-24T06:09:41+0000
