Sublimation Face Masks - Double Layer - Fluorescent Colours

More information about double-layer fluorescent face masks for sublimation

• Design in vivid, very bright colours. Perfect to combine with clothes when going for a walk or to work.
• Side opening on the back to introduce a sanitary filter (not included).
• They are labelled with the OEKO-Tex Standard 100, which guarantees that the fabric they are made of does not contain substances that are harmful to health.
• They protect from the natural act of touching your face and from breathing dust, pollen or other particles found in the air. They do not fulfil the function of an approved sanitary mask for protection against coronavirus.
• Suitable for children, women and men of all ages.
• With an elastic for ease of placement. No tying up required.
• Reusable and long-lasting. Can be reused as many times as desired.

RECOMMENDATIONS

• Wash before use.
• Can be machine washed at a maximum temperature of 40ºC.
• For greater certainty about the size of the mask to choose, you may print the template on paper (provided below), crop it and test it.
• Due to the size of the children's masks, they may be suitable for kids aged 7-8 years or older (see dimensions).
• It must be taken into account that, when sublimating, the colours of the masks will be mixed with those of the image to be printed. The original colours of the image may change. A way to minimise this effect is to choose designs with dark colours.
• Available here the OEKO-TEX Standard 100 Label for 100% Polyester Face Masks (.pdf - 408 Kb)
• More information on products for prevention against the spread of the COVID-19 virus in Spain: Boletín Oficial del Estado - Núm. 109 del 19 de abril de 2020 (.pdf - 244 kB).

DOWNLOADABLE TEMPLATES (PSD/PNG Format)

Brildor Template Customisable Mask for Kids (.psd - 266kB).

Brildor Template Customisable Mask for Kids (.png - 27kB).

Brildor Template Customisable Mask for Adults (.psd - 334kB).

Brildor Template Customisable Mask for Adults (.png - 30kB).

Mask dimensions for kids and adults (approx.)

NOTE

• These values are approximate and are provided as a guide.
• They may vary slightly as a result of normal irregularities in the manufacturing process.

Recommended instructions and parameters for sublimation printing

• Print the design in mirror image and trim it in the shape of the mask.
• Preheat the press to 200ºC.
• Put protective paper on the press' lower platen.
• Hold the paper's printed side against the mask. Fix it with heat-resistant tape, or even better, use a temporary adhesive. Make sure you remove all of the wrinkles.
• Place the mask on the press' lower platen and cover it with protective paper.
• Close the press at heavy pressure for 40 seconds.
• Using a protective glove, remove the newly printed face mask from the press.
• Remove the paper carefully.