Opaque Binder for screen printing - Brildor

More information about the Brildor opaque binder for screen printing

• Manufactured in Turkey in cooperation with Brildor.
• Great for printing light and dark coloured garments. Useful for T-shirts, bags and sweatshirts, but also for paper and cardboard printing.
• High yield and colour definition, excellent rub and wash fastness.
• It forms a layer on top of the fabric that prevents light from passing through.
• Perfect for natural and synthetic fabrics such as cotton, polyester, non-woven, . . .
• Suitable for four-colour and photo-quality printing.
• Pigments are required to colour the clear binder.
• We recommend not to exceed 5% pigment in clear binders to avoid affecting the rubbing and fastness of the layer.
• It is recommended to pre-dry each layer with a heat gun, but you can also add a wet layer on an undried one (wet-on-wet).
• Air-dry or oven-dry. If you choose to air dry it, it is best to leave the garment exposed for 72 hours.
• Polymerisation or curing is required. We recommend pressing the print after curing it for a better finish.
• It dries quickly and doesn’t clog the mesh.
• Odourless and solvent-free.
• Environmentally friendly water-based ink. PVC and phthalate free.
• Cleaning the workspace and screens is simple, as all you need is water and a sponge.

COMPOSITION

• Clear binder: polymer dispersion, special mix (water-based) (30-40%), Ethylene glycol (1-3%) and water (completed to 100%).
• White binder: polymer dispersion, special mix (water-based) (30-40%), Titanium dioxide (20-28%), Ethylene glycol (1-3%) and water (completed to 100%).

RECOMMENDED PARAMETERS FOR USE^(*)

^{(*)Approximate measurements for guidance purposes only. We recommend prior testing to adjust these parameters according to the results you’re looking for.}

DIMENSIONS (APPROX.)