€57.84 VAT not included / Each Unit

Cricut EasyPress Mini Zen Blue

Ref.
049675

Heat press to personalise small or irregular surfaces using dye sublimation printing, transfer, heat transfer vinyl and other techniques.

  • Heat plate with a precision tip allowing access to difficult areas
  • 3 preset heat levels
  • Insulated safety base for storage when not in use
  • Heat plate dimensions: 5 x 8.3 cm

More information

Availability:
Immediate: 4 units
Our availability is not enough?
Let us know how much you need
I WANT MORE
€57.84 VAT not included / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

 

More information about the Cricut EasyPress Mini Zen Blue

 

INDEX

> Description

> Recommendations

> Preset heat settings

> Instructions for use

> Technical details

 

 

DESCRIPTION

  • Small, lightweight and portable heat press
  • 3 preset pressing settings
  • Light indicators that act as a control panel showing the selected preset heat setting: low (1 line), medium (2 lines) and high (3 lines)
  • Ceramic-coated curved heat plate
  • It turns off automatically after 10 min of inactivity
  • Ergonomic handle
  • CE marking guarantees that this machine meets the technical requirements of the European Union

 

 

RECOMMENDATIONS

  • Materials must be completely dry. Prepress them first if you think they might hold some moisture
  • During the transfer, move the press continuously over the design, including the centre and edges. It is also advisable to press approximately 13 mm beyond the edge of the design
  • When transfers are made on irregular hollow shapes such as hats or shoes, you should pad them or use a suitable support. The surface should be firm enough for easy pressing, to avoid creasing and to distribute the heat evenly
  • Place the press on the safety base when not in use
  • Keep away from children and use with caution

 

 

PRESET HEAT LEVELS

Temperature Low Medium High
Indicator light on 1 line 2 lines 3 lines
Degrees (ºC) 125-145 150-175 180-205

 

 

INSTRUCTIONS FOR USE

  1. Connect the press to the mains
  2. Switch it on by pressing the on/off button (thermometer icon)
  3. Choose the desired temperature (low, medium or high) by pressing the thermometer button
  4. Wait for the indicator light(s) to turn from orange to green
  5. Press as long as indicated for the material. Check the Cricut website to help you with the parameters of each material
  6. Move the press back and forth over the design maintaining even pressure
  7. Hold press the on/off button (thermometer icon) until you hear a beep to turn the press off

 

 

TECHNICAL DETAILS

Maximum temperature (ºC) 205
Voltage (V / Hz) 220 / 50
Power (W) 450
DIMENSIONS
Press (cm) 8.5 x 9.5 x 5
Heat plate (cm) 5 x 8.3
Base (cm) 7.5 x 11 x 3.3
Cable length (cm) 200
Press weight (g) 475
More Information
Ref. 049675
EAN 0093573734021
Net Weight (kg) 0.586
Gross Weight (kg) 0.842
Billable Weight (kg) 0.9260
Power (W) 450
Pressure regulation Manual
Write Your Own Review
Post your question