€0.99 VAT not included before €4.99 / Each Unit

Face Shield - rPET Plastic - Clear

Ref.
039382

An antibacterial and anti-splash face shield you can personalise using vinyl and transfer. Specially designed to protect the mouth, nose and eyes.

  • Made of 500-micron 80% recycled PET (rPET).
  • Totally transparent, it does not reduce the visual field.
  • Adjustable. Can be used with glasses and a face mask.
  • Print area: 42 x 23.4 cm

More information

Availability:
Immediate: more than 100 units
€0.99 VAT not included before €4.99 / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the clear rPET plastic face shield

  • Mask style, with a futuristic design. Manufactured entirely in Spain.
  • Comfortable, light and easy to put on and take off.
  • Made with a single piece of PET, customisable on its entire surface.
  • Includes 2 white foam pads to avoid direct contact between the shield and the forehead.
  • It has side straps that close at the back to fit the head.
  • Reusable. Can be sterilised and used again as many times as desired.
  • Suitable for contact with the skin.
  • Supplied unassembled in a plastic bag.
  • Can be personalised with vinyl as well as water-slide decal paper, which does not require heat to be applied.

DIMENSIONS (APPROX.)

        A   33.5 cm
 B
79 cm
 C 42 cm
 D 23.4 cm
 E 3.5 cm
 F 4.5 cm
 G 6 cm

Unassembled shield 79 x 33,5 cm
Thickness 1 mm
Foam Ø30 x 4 mm
Adjustment
From 3 cm to 13.5 cm
Print area 42 x 23.4 cm

RECOMMENDATIONS FOR THE CARE OF THE VISOR

  • In order for the face shields to continue to fulfil their protective function, they must be cleaned properly.
  • It is recommended to clean the visor with products intended for this type of material which do not contain aggressive substances.
  • If no special cleaning products are available, the visor can be washed with bleach and water, or with surgical spirit.
  • Not suitable for dishwashers.
  • Store in a place where it cannot be deformed by pressure.

ASSEMBLY INSTRUCTIONS

STEP 1: Mounting the front band containing the foam pads

  • Hold the side straps: one of them contains the foam pads and a flap, and the other a square hole.
  • Fold the flap inward. In other words, towards the inside of the visor.
  • Insert the flap into the hole and fold it again to prevent it from coming out of the hole.
  • Press on both sides to make sure the side straps are securely attached by the flap.

STEP 2: Mounting the band to adjust the visor to the head

  • Attach the side straps: one with the edges segmented like a saw, and the other with a slot.
  • Insert the band into the slot.
  • Extract the band from the other side of the slot and adjust to the size of the head.

IMPORTANT

More information on products for prevention against the spread of the COVID-19 virus in Spain (also known as coronavirus): Boletín Oficial del Estado - Núm. 109 del 19 de abril de 2020 (.pdf - 244 kB).

More Information
Ref. 039382
Gross Weight (kg) 0.076
Billable Weight (kg) 0.0800
Dimensions (mm) 790 x 335
Print area (mm) 420 x 234
Thickness (mm) 1
Colour Transparent
Surface material Plastic
Items Face shield
Accessory details Adjustment accessory
Marking techniques Self-adhesive vinyl
Write Your Own Review
Post your question