€19.95 VAT not included / Each Unit

We R Memory Keepers - Foil Quill Magnetic Mat - 30.5 x 30.5cm

Ref.
044898

We R Memory Keepers Foil Quill magnetic mat specially designed to hold the foil in place during application. Useful for scrapbook and craft projects.

  • Gold coloured aluminium with 4 magnet strips to keep the foil in place.
  • Grid with measurement units in centimetres and inches.
  • Suitable for cutting machines, freestyle or pressurised ballpoint pens.
  • Working space: 30.5 x 30.5 cm (12" x 12")

More information

Availability:
Immediate: 31 units
Our availability is not enough?
Let us know how much you need
I WANT MORE
€19.95 VAT not included / Each Unit
VAT not included
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about the We R Memory Keepers Foil Quill magnetic mat

  • Holds the foil during the transfer process with the help of the magnet strips. No need to use adhesive tape.
  • Suitable for hot and cold foil.
  • Includes 4 magnet strips: 2 long and 2 short.
  • Works with the following cutting machines: Cricut Maker, Cricut Explore Air 2, Silhouette Cameo 3, Sizzix Eclips 2 and Brother Scan-N-Cut (DX y SDX125).
  • Delivered in a blister pack with a hole you can hang on a display stand.

THINGS TO KEEP IN MIND

  • Make sure to remove all blades from the plotter before using the mat to avoid any damage.

TIPS & TRICKS

  • Cut the material before foiling it or work with pre-cut pieces.
  • Use documents with crop marks, print, apply the foil and cut using your usual cutting machine.
  • Use the Pixscan mat to cut the material and then do the foiling. You will find it in Related Products.

DIMENSIONS (APPROX.)

Magnetic mat 30.5 x 30.5 cm
Thickness 0.33 mm
Short magnetic strips 7.6 x 1.2 x 0.2 cm
Long magnetic strips 28 x 1.2 x 0.2 cm
Working space 30.5 x 30.5 cm
Mat weight 209 g

RECOMMENDATIONS FOR USE WITH VINYL CUTTER

  • Remove all blades from the machine cartridge.
  • Place the side magnetic strips 2.5-5 cm from the top edge of the mat. This avoids hindering the carriage.
  • Place the long strips on the sides and the short strips at the bottom of the project.
  • The material and the foil should be 1 mm thick to prevent jams.
  • Level the mat to the height of the machine so that it fits smoothly.

INSTRUCTIONS FOR USE WITH VINYL CUTTER

  1. Align and adhere the mat to the cutting mat’s grid you normally use. The grids should be the same size.
  2. Place the material on the magnetic blanket using the grid to align.
  3. Place the foil sheet on top of the material and hold it with the magnet strips. Leave the top side without magnet strips so as not to hinder the machine carriage during foiling.
  4. Adjust the rollers by sliding them sideways. Not for all vinyl cutters.
  5. Load the magnetic mat from the machine interface.
More Information
Ref. 044898
EAN 633356611776
Net Weight (kg) 0.257
Gross Weight (kg) 0.373
Billable Weight (kg) 0.4100
Write Your Own Review
Post your question