Starting at: €1.52 / Each Unit

Sublimation Square Natural Wood Keyring Double-Sided

Ref.
037073

Square key ring printable on both sides by dye sublimation printing.

  • Wood MDF 4 mm thick
  • Including metal ring and plastic snap closure
  • Print area (per side): 5,7 x 5,7 cm

More information

Availability:
Immediate: 99 units
€1.79 VAT not included / Each Unit
VAT not included
  • Buy 10 for €1.70 each
  • Buy 100 for €1.61 each
  • Buy 500 for €1.52 each
Reward Points
As a Premium Brildor Member, for each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program. For each unit you buy, you will accumulate {{POINTS}} to redeem on your next order. Discover the Brildor Loyalty Program.

More information about Sublimation Square Natural Wood Keyring Double-Sided

 

INDEX

> Description

> Things to keep in mind

> Stencils

> Dimensions

> Recommended instructions and parameters for sublimation printing

 

 

DESCRIPTION

  • Made of wood with natural maple veneer in natural colour matte finish
  • Smooth surface, resistant to humidity and scratch resistant
  • No front or back. Can be sublimated on either side
  • Rounded corners
  • It can also be personalised using other techniques such as laser engravingDTFself-adhesive vinylscreen printing...

 

 

THINGS TO KEEP IN MIND

  • The surface may have veins specific to the natural wood. For the same reason, its colour may vary slightly from that shown in the photos sample in the photos

 

 

TEMPLATE

Template keyring natural wood sublimatable square double-sided (.eps - 1,06 MB).

 

 

DIMENSIONS

Keyring (cm) 5,7 x 5,7
Thickness (mm) 4
Metal ring (mm) Ø25
Snap lock (mm) 8 x 35

 

 

RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING

Parameters given for guidance only. It is recommended to carry out preliminary tests in order to make the necessary adjustments before starting production.

  • Print the design in mode mirror
  • Remove the metal ring and the plastic seal if worn
  • Preheat the press to 200 ºC
  • Place the keyring in the lower platen of the press and the printed part of the paper on the keyring. Fix it with thermal adhesive tape
  • Close the press with medium pressure for 40-45 seconds
  • With the help of a protective glove, remove the keyring Remove the freshly sublimated
  • Carefully peel off the paper
  • Repeat the same process to sublimate the other side of the keyring if desired
  • When it has cooled, place the ring and the snap fastener
More Information
Ref. 037073
Gross Weight (kg) 0,016
Billable Weight (kg) 0.0200
Dimensions (mm) 57 x 57
Print area (mm) 57 x 57
Thickness (mm) 4
Colour Natural Wood
Surface material Wood
Items Keyrings
Accessory details Ring
Marking techniques Dye sublimation
Write Your Own Review
Post your question