Double Sided Hot Melt Adhesive Film for Textile Fabric

Double-sided heat adhesive film especially useful for sewing and embroidery. Perfect for turning patches or appliqués into hotmelt adhesives, and for seamless hemming.

Made of PET with silicone adhesive, suitable for cotton, polyester and their blends
Available in 2 formats: lanyard and film, in 60 μ (50 g/m²) and 150 μ (140 g/m²) thickness
Sales units: 1 m, 5 m, 25 m and 91 m rolls with a width of 2,5 cm, 5 cm and 47 cm

Availability:

Shown on each product

Skip to the beginning of the images gallery

Description

More information about the double-sided hot melt adhesive film for textile fabric

Replaces stitching with an adhesive, making it a perfect solution for hemming and joining fabric without sewing: curtain hems, decorative appliqués with trimmings, embroidery on cuffs, collars or pockets, appliqué bonding and more
Heat-activated adhesive on both sides. Allows you to convert motifs such as patches and embroidered or printed badges and emblems into stickers that can be easily applied to textile garments such as elbow or knee pads, bags or caps
Ribbon format tape very useful for merchandising, leather goods, tailors, dressmakers, etc
It is placed on the garment and creates a permanent bond by applying heat using a heat press or domestic iron
Available in 2 thicknesses. You can choose the one that best suits the stiffness you want for the embroidered motif to be applied
Hotmelt film designed for adding motifs or embellishments to garments with no sewing machine
The tapes come wound on a cardboard core of Ø7.5 cm, very useful for placing on roll holders
In Related Products you will find additional lanyard and films for different embroidery uses

TIPS & TRICKS

Create side strips for garments. Apply the hotmelt film on a personalised tape (Ref.921021) to create your own clothing brand
Make labels to mark and identify clothes

THINGS TO KEEP IN MIND

Applies on cotton, polyester and their blends. For synthetic fabrics like lycra, nylon or polyamide, we recommend testing
Follow the garment’s parameters to wash and iron the film
To bond it, iron below 150ºC to avoid sublimation

Recommended application parameters with a heat press ^(*)

Lay the hot-melt adhesive film with the shiny white side down where you want to bond
Iron at 120ºC for 10 seconds
If you want to stick fabric on top of the applied adhesive, remove the backing and iron with the same parameters as above

^(*) We recommend carrying out tests to establish the parameters that best suit the fabric used.